XP ntvdm.exe Patch

Posted on 2003-04-01
Medium Priority
Last Modified: 2008-03-27
I have a big problem with this emulator of DOS running programs of FOXPRO 6.2, sometimes raise an error like "no enought memory" or "too many variables" etc...

but always errors on memory based...

I wonder if there is somewhere a Patch of this... or an Update or Upgrade or something!!

Can anybody help me about this???

(sorry about my english)
Question by:DAVIDSS79
  • 2

Author Comment

ID: 8246883
LVL 44

Accepted Solution

CrazyOne earned 270 total points
ID: 8246889
No there isn't any updates or patches

Troubleshooting MS-DOS-Based Programs in Windows


The information in this article applies to:

Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
For a Microsoft Windows 2000 version of this article, see Q165214 .

This article describes how to troubleshoot MS-DOS-based programs in Windows.


Test the Ntvdm Subsystem
The first thing to test when you are having problems with MS-DOS-based programs is the Windows Virtual DOS Machine (NTVDM) subsystem. You can use the Command.com utility to test whether the NTVDM subsystem is running properly. To start Command.com, follow these steps:
Click the Start button, and then click Run .

In the Open box, type command.com , and then click OK .

This should start a command prompt window. If this does not work properly, then there is a problem with the NTVDM subsystem, and you should check the following items:
Check the Config.nt and Autoexec.nt files in the SystemRoot%\System32 folder for non-standard settings.

Use a REM statement to remark out all entries except the following default entries:

   dos=high, umb


   lh %SystemRoot%\System32\Mscdexnt.exe
   lh %SystemRoot%\System32\Redir
   lh %SystemRoot%\System32\Dosx
   lh %SystemRoot%\System32\Nw16 (only if CSNW is installed)
   lh %SystemRoot%\System32\Vwipxspx (only if CSNW is installed)
Another way to accomplish this is to expand Autoexec.nt_ and Config.nt_ from the Windows CD-ROM to the %SystemRoot%\System32 folder.

Press CTRL+SHIFT+ESC to start Task Manager, close all running programs that are running, and make sure that there are no other NTVDM processes running.

Prevent all programs from running at startup. Programs can run from three places at startup: the Startup groups, the Run and RunOnce lines in the registry, and the "run=" and "load=" lines in the Win.ini file. You can check these places as follows:

The Startup groups are folders on the local hard disk. They are in the following locations:

%SystemRoot%\Profiles\ user_name \Start menu\Programs

%SystemRoot%\Profiles\Default user\Start menu\Programs

The Run and RunOnce lines are in the registry, under the following registry key:

You can edit the Win.ini file by using Notepad. The Win.ini file is in the %SystemRoot% folder.

Examine the NTVDM system files in the %SystemRoot%\System32 folder. Check the following files and make sure that they are the correct version by checking the size and date:

   Ntvdm.dll (Windows NT 3.1 only)
The registry entries that are associated with the NTVDM subsystem are:

<BLOCKQUOTE> HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment
This key stores the environment variables from the Config.sys and Autoexec.bat files for use in Windows.

<BLOCKQUOTE> HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ VirtualDeviceDrivers
This key stores the device drivers that are used in an NTVDM session. Windows Setup creates these entries when a device driver is installed.

Check Program-Specific Issues
The following functions do not work in Windows XP:
All MS-DOS functions except task-switching API (application programming interface) functions are supported.

Block mode device drivers are not supported. Block devices are not supported, so MS-DOS I/O control (IOCTL) APIs that deal with block devices and SETDPB functions are not supported.

Interrupt 10 function 1A returns 0; all other functions are passed to read-only memory (ROM).

Interrupt 13 calls that deal with prohibited disk access are not supported.

Interrupt 18 (ROM BASIC) generates a message that says that ROM BASIC is not supported.

Interrupt 19 does not restart the computer, but cleanly closes the current virtual DOS machine (VDM).

Interrupt 2F, which deals with the DOSKEY program callouts (AX = 4800), is not supported.

Microsoft CD-ROM Extensions (MSCDEX) functions 2, 3, 4, 5, 8, E, and F are not supported.

The 16-bit Windows subsystem on an x86 computer supports enhanced mode programs; it does not, however, support 16-bit virtual device drivers (VxDs). The subsystem on a non-x86 computer emulates the Intel 40486 instruction set, which lets the computer run Enhanced-mode programs, such as Microsoft Visual Basic, on reduced instruction set computers (RISC).

This means that Windows does not support 16-bit programs that require unrestricted access to hardware. If your program requires this, your program will not work in Windows NT, Windows 2000, or Windows XP.

You should next check to see whether the Autoexec.nt and Config.nt file settings are correct. Always try the default settings that are listed earlier in this article. Some programs require special settings or drivers to run in the Config.sys or Autoexec.bat file. If this is the case, there are two options for initializing these files when you starting your program:
Enter these lines in the Config.nt and Autoexec.nt files in the %SystemRoot%\System32 folder.

Create new Config and Autoexec files to be run when starting this program. To do so, follow these steps:

Create the files and save them with the extension .nt in a folder other than %SystemRoot%\System32 (these files are usually saved in the same folder as the program).

Right-click the desktop, point to New , and then click Shortcut .

In the Type the location of the item box, type the full path to the file that you want to run, and then click Next .

In the Type a name for this shortcut box, type the name for the shortcut, and then click Finish . This creates a new shortcut on the desktop.

Right-click the new shortcut, and then click Properties .

On the Program tab, click Windows to open a dialog box for the path to the Autoexec and Config files.

Type the full path to the files that you created, and then click OK in both dialog boxes.

Clicking this icon runs the Autoexec and Config file specified for the program. These settings are subject to the same restrictions as those listed for MS-DOS-based programs.
There are other settings in a program's properties. If your program is not working properly, check all of the tabs and make sure that the program settings are set to the manufacturer's specification. If the program is still not working, contact the vendor of the program to make sure that the program is supported under Windows.

For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:
Q171940 MS-DOS Application I/O Operations Cause Floppy Drive Access
Q102418 NTVDM Error: There Is No Disk in the Drive
Q156687 Entries in CONFIG.NT or AUTOEXEC.NT May Cause NTVDM Errors
Q142026 Err: 'Hidden Console of WOW VDM' Running 16-bit or DOS App
The third-party products discussed in this article are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Published Jan 14 2002 12:52PM  Issue Type kbinfo  
Last Modifed Jan 25 2002 12:54PM  Additional Query Words apps msdos application  
Keywords kbenv kbtshoot

COPYRIGHT NOTICE. Copyright 2002 Microsoft Corporation, One Microsoft Way, Redmond, Washington 98052-6399 U.S.A. All rights reserved.

Author Comment

ID: 8257041
Thanks... any way, microsoft sucks...

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We have adopted the strategy to use Computers in Student Labs as the bulletin boards. The same target can be achieved by using a Login Notice feature in Group policy but it’s not as attractive as graphical wallpapers with message which grabs the att…
Issue: Unstable cursor in Windows XP and Windows runs extremely slow in that any click will bring up the Hour glass (sometimes for several seconds before giving you what you want) . Troubleshooting Process and the FINAL FIX: This issue see…
this video summaries big data hadoop online training demo (http://onlineitguru.com/big-data-hadoop-online-training-placement.html) , and covers basics in big data hadoop .
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
Suggested Courses

578 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question