Solved

connect win2K computers to network with server win2003

Posted on 2003-10-23
3
351 Views
Last Modified: 2010-03-19
What steps should I follow to connect my Win2k computer to my Win2003 Server?
0
Comment
Question by:tkerstetter
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 10

Accepted Solution

by:
Luxana earned 250 total points
ID: 9611813
Greetings tkerstetter

Are you using HUB or switch in your network? Or you want connect just two computers together? I will give you few simple steps but you have to be more specific what exactly you want to do and what you have done.

1/ install network cards to computers
2/ connect them together with UTP cable. If you want connect just 2 computers make a crossover cable or if you want connect more then two make straight-throuhg cable. look following link:
http://www.cisco.com/warp/public/701/14.html#topic6
3/then set the IP address :
comp1: 192.168.0.1
mask:255.255.0.0
comp2:192.168.0.2
mask: 255.255.0.0

and you should by alright...

good luck
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
An article on effective troubleshooting
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question