Solved

NetBEUI and Windows 2003 server

Posted on 2003-10-27
1
713 Views
Last Modified: 2010-05-18
Using NetBeui I was sharing files between Windows 2000 server and a DOS box. I upgraded to Windows 2003 and lost the NetBeui protocol. Any sugestions on how to network the DOS and 2003 server?
0
Comment
Question by:garysamuels
1 Comment
 
LVL 3

Accepted Solution

by:
lst-yves earned 500 total points
ID: 9632032
Hi gary,

I ran onto the same problem. Even though Microsoft say it dosen't support Netbeui under 2003 anymore, you can still install it with a Windows XP media. Get your Windows XP CD, then go to your network connections, properties on the one you need the protocol on, and then click on install.

You'll then need to go to cdrom:\valueadd\mfst\net\netbeui ... install this driver (.inf) and you're done (requires reboot).

For more details :

http://support.microsoft.com/default.aspx?scid=kb;en-us;301041&Product=winxp

Have fun,
Laurence.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Join & Write a Comment

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
A common practice in small networks is making file sharing easy which works extremely well when intra-network security is not an issue. In essence, everyone, that is "Everyone", is given access to all of the shared files - often the entire C: drive …
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
This video shows how to remove a single email address from the Outlook 2010 Auto Suggestion memory. NOTE: For Outlook 2016 and 2013 perform the exact same steps. Open a new email: Click the New email button in Outlook. Start typing the address: …

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

17 Experts available now in Live!

Get 1:1 Help Now