Solved

DATA SENDING PROBLEM TO CLIENT?

Posted on 2003-10-27
4
209 Views
Last Modified: 2010-04-11

I am developing a network version of Reservation system.  The procedure is as follows :

There are 8-10 CLIENT offices in various places of countries, which is under local DIAL-UP System (without any valid IP address).

If a person wants to reserve something for any of this CLIENT offices, he will contact the central server office (which will place in the CAPITAL CITY OF THE COUNTRY) and will reserve. This central server stores this information.  This central server have valid IP address.  And my aim is : Server needs to send the booked information to the corresponding client offices system.  Due to the non-availability of valid IP address in CLIENT offices, now I am not able to send this information.  How we can solve this?

My question is : is there any way of connect all this 8-10 offices under a WAN segment under this central Server office.  The main problem is this 8-10 offices are using various ISP service.  

Regards
Suresh
0
Comment
Question by:sureshbvs
  • 2
4 Comments
 
LVL 7

Accepted Solution

by:
NicBrey earned 30 total points
ID: 9631976
I would set up a RAS server at the Central server in the capital.  Then in stead of the clients dialing up to an ISP, they dial straight into your network at the capital. The RAS server can assign the clients addresses from the private address space. You do not need a public IP address forthis to work.

This should get you started:
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windows2000serv/reskit/intnetwk/part1/intch02.asp
http://www.microsoft.com/technet/treeview/default.asp?url=/TechNet/prodtechnol/winntas/proddocs/rras40/rrasch01.asp
0
 
LVL 7

Expert Comment

by:NicBrey
ID: 9631992
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question