Display Card and Win2K Booting problem

I have the display card of Diamond multimedia System make. I installed
Win2K on my machine. With this display card my system doesn't boot. But at the same time i am able to boot Win2K in VGA mode with same display card also it properly boots in win98 system. If anyone has any idea what could be the problem please let me know. Thanks
Rakesh
rakesh_manoharAsked:
Who is Participating?
 
Rob StoneCommented:
You can also get into Normal mode by putting a /basevga switch in the c:\boot.ini file next to the /fastdetect switch.

If you are struggling for drivers for your card, try here:
www.driverguide.com
User ID  =  Drivers
Password = All
0
 
Rob StoneCommented:
You need to get some drivers for it.

In safe mode, remove the drivers for the VGA card and then when normal mode loads install the windows 2000 drivers.

0
 
Rob StoneCommented:
My answers would have helped diagnose this and help rectify the problem.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.