aread-NZ
asked on
DHCP on Cisco 6509 MSFC not redirecting Microsoft RIS PXE requests
Hi All,
I'm using Microsoft Remote Installation Services successfully. I need to move from using our Win2k DHCP Servers to using the MSFC card on a Cisco 6509.
The current setup is this:
interface Vlan9
description Admin
ip address 192.168.66.1 255.255.255.128
ip helper-address 192.168.64.143 (Win2k DHCP Server)
ip helper-address 192.168.64.144 (Win2k DHCP Server)
ip helper-address 192.168.64.148 (Win2k RIS Server)
no ip redirects
When I change to using DHCP on the MSFC, the network card can not longer boot from the RIS Server.
I have used this setup on the MSFC:
ip dhcp pool vlan9
network 192.168.66.0 255.255.255.128
bootfile startrom.com
domain-name ourdomain.com
dns-server 192.168.64.143 192.168.64.144
default-router 192.168.66.1
option 66 ascii "192.168.64.148"
option 60 ascii "PXEClient"
And removed the IP helper records for the win2k DHCP servers:
interface Vlan9
description Admin
ip address 192.168.66.1 255.255.255.128
ip helper-address 192.168.64.148 (Win2k RIS Server)
no ip redirects
I have tried this with and without the ip helper-address 192.168.64.148 line, and with and without the bootfile and optionn entries in the DHCP scope.
Sorry about the low points value, it's all I have left to my name.
Regards,
Andrew
I'm using Microsoft Remote Installation Services successfully. I need to move from using our Win2k DHCP Servers to using the MSFC card on a Cisco 6509.
The current setup is this:
interface Vlan9
description Admin
ip address 192.168.66.1 255.255.255.128
ip helper-address 192.168.64.143 (Win2k DHCP Server)
ip helper-address 192.168.64.144 (Win2k DHCP Server)
ip helper-address 192.168.64.148 (Win2k RIS Server)
no ip redirects
When I change to using DHCP on the MSFC, the network card can not longer boot from the RIS Server.
I have used this setup on the MSFC:
ip dhcp pool vlan9
network 192.168.66.0 255.255.255.128
bootfile startrom.com
domain-name ourdomain.com
dns-server 192.168.64.143 192.168.64.144
default-router 192.168.66.1
option 66 ascii "192.168.64.148"
option 60 ascii "PXEClient"
And removed the IP helper records for the win2k DHCP servers:
interface Vlan9
description Admin
ip address 192.168.66.1 255.255.255.128
ip helper-address 192.168.64.148 (Win2k RIS Server)
no ip redirects
I have tried this with and without the ip helper-address 192.168.64.148 line, and with and without the bootfile and optionn entries in the DHCP scope.
Sorry about the low points value, it's all I have left to my name.
Regards,
Andrew
Have you enabled portfast on the access port of the switch that the server is on??
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.