Solved

PIX 501 Access-list Creation

Posted on 2003-10-30
7
1,813 Views
Last Modified: 2010-04-08
I am reposting this from an earlier post with a clearer picture of what the issue is.

I want to create an access list called 'letmein' with the remark 'inbound traffic' on a PIX 501. I have done this before on another PIX but for the life of me I cant seem to see what I am doing wrong.

Below is the script in production with the group 'letmein'. The line in question is the following:

'access-list letmein remark inbound traffic'


PIX Version 6.3(1)
interface ethernet0 10baset
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 65yY4dZAlX2lNl1k encrypted
hostname pixfirewall
domain-name *****.net
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
name 192.168.1.100 Bigdog
name 192.168.1.3 ***PMS
name 192.168.1.5 OWA***
name 192.168.1.1 APPSERVER
object-group service pcANY tcp
  description pcANYwhere
  port-object range 65301 65301
  port-object eq pcanywhere-data
  port-object range pcanywhere-data 5632
object-group service TermServ tcp
  description RDP
  port-object range 3389 3399
access-list inside_access_in remark outbound
access-list inside_access_in permit tcp any any
access-list letmein remark inbound traffic
access-list letmein permit tcp any host x.x.x.x eq smtp
access-list letmein permit tcp any host x.x.x.x eq www
access-list letmein permit tcp any host x.x.x.x eq https
access-list letmein permit tcp any host x.x.x.x eq pop3
access-list letmein permit tcp any host x.x.x.x eq imap4
access-list letmein permit tcp any host x.x.x.x eq pcanywhere-data
access-list letmein permit tcp any host x.x.x.x eq 3389
access-list letmein permit udp any host x.x.x.x eq 3389
access-list letmein permit udp any host x.x.x.x eq 65301
access-list letmein permit tcp any host x.x.x.x eq 65301
access-list letmein permit udp any host x.x.x.x eq 143
access-list letmein permit udp any host x.x.x.x eq 220
access-list letmein permit tcp any host x.x.x.x eq 220
access-list letmein permit tcp any host x.x.x.x eq 585
access-list letmein permit udp any host x.x.x.x eq 585
access-list letmein permit udp any host x.x.x.x eq 993
access-list letmein permit tcp any host x.x.x.x eq 993
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside pppoe setroute
ip address inside 192.168.1.20 255.255.255.0
ip verify reverse-path interface outside
ip audit name OutAttack attack action drop reset
ip audit interface outside OutAttack
ip audit info action alarm
ip audit attack action alarm
pdm location Bigdog 255.255.255.255 inside
pdm location ***PMS 255.255.255.255 inside
pdm location OWA*** 255.255.255.255 inside
pdm location APPSERVER 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
static (inside,outside) udp interface 143 ***PMS 143 netmask 255.255.255.255 0 0

static (inside,outside) tcp interface imap4 ***PMS imap4 netmask 255.255.255.255
 0 0
static (inside,outside) tcp interface pop3 ***PMS pop3 netmask 255.255.255.255 0
 0
static (inside,outside) tcp interface www OWA*** www netmask 255.255.255.255 0 0

static (inside,outside) udp interface 3389 OWA*** 3389 netmask 255.255.255.255 0
 0
static (inside,outside) tcp interface 3389 OWA*** 3389 netmask 255.255.255.255 0
 0
static (inside,outside) tcp interface https OWA*** https netmask 255.255.255.255
 0 0
static (inside,outside) tcp interface pcanywhere-data APPSERVER pcanywhere-data
netmask 255.255.255.255 0 0
static (inside,outside) udp interface 5631 APPSERVER 5631 netmask 255.255.255.25
5 0 0
static (inside,outside) udp interface pcanywhere-status APPSERVER pcanywhere-sta
tus netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 5632 APPSERVER 5632 netmask 255.255.255.25
5 0 0
static (inside,outside) udp interface 65301 APPSERVER 65301 netmask 255.255.255.
255 0 0
static (inside,outside) tcp interface 65301 APPSERVER 65301 netmask 255.255.255.
255 0 0
static (inside,outside) tcp interface smtp ***PMS smtp netmask 255.255.255.255 0
 0
access-group letmein in interface outside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
x.x.x.x 255.255.255.255 outside
***PMS 255.255.255.255 inside
OWA*** 255.255.255.255 inside
ssh timeout 5
console timeout 0
vpdn group pppoex request dialout pppoe
vpdn group pppoex localname *****
vpdn group pppoex ppp authentication pap
vpdn username ***** password *********
dhcpd address 192.168.1.22-192.168.1.129 inside
dhcpd dns x.x.x.x x.x.x.x
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain *****.com
dhcpd auto_config outside
terminal width 80
Cryptochecksum:40394d7ae7c095168a33497bb4df0729
: end

Thanks in Advance
Cepolly
0
Comment
Question by:cepolly
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 3
7 Comments
 
LVL 2

Expert Comment

by:TomCRiley
ID: 9652933
I didn't know that access-list remarks could be used in a PIX.  Is that something new with the 6.3 OS versions?  I thought access-list remarks were only valid in IOS devices (i.e., routers).
0
 
LVL 1

Author Comment

by:cepolly
ID: 9653850
good question. I don't know. I do know that i was able to do it on the above 501.
0
 
LVL 2

Expert Comment

by:TomCRiley
ID: 9653920
If you are able to do it, what is the question?
0
Will You Be GDPR Compliant by 5/28/2018?

GDPR? That's a regulation for the European Union. But, if you collect data from customers or employees within the EU, then you need to know about GDPR and make sure your organization is compliant by May 2018. Check out our preparation checklist to make sure you're on track today!

 
LVL 1

Author Comment

by:cepolly
ID: 9654393
I want to create an access list called 'letmein' with the remark 'inbound traffic' on a PIX 501. I have done this before on another PIX but for the life of me I cant seem to see what I am doing wrong.

I am doing it incorrectly.
0
 
LVL 1

Author Comment

by:cepolly
ID: 9654399
I don't remember the correct syntax. Though it may be a version issues as you pointed out. I will check to see what the version differences are and then check back. If you know of a link for this, please pass it on.

Thanks for the lead.
0
 
LVL 2

Accepted Solution

by:
TomCRiley earned 350 total points
ID: 9654933
Here's your problem as I suspected...

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008017278e.html

...under the heading "Adding comments to ACLs".

It says that this functionality became available in version 6.3.  The code you posted does say it was from version 6.3(1) so that will probably explain your problem.  The new PIX probably needs to be upgraded.

Hope this helps,
Tom
0
 
LVL 1

Author Comment

by:cepolly
ID: 9654949
very good. thanks.

I should have looked at that 1st.

thanks again.
0

Featured Post

When ransomware hits your clients, what do you do?

MSPs: Endpoint security isn’t enough to prevent ransomware.
As the impact and severity of crypto ransomware attacks has grown, Webroot has fought back, not just by building a next-gen endpoint solution capable of preventing ransomware attacks but also by being a thought leader.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
AnyConnect VPN endpoint authentication/validation 4 61
Change name on 7940 Cisco UM 10 86
Single Number Reach 3 99
Cisco ACS Adding Root and Intermediate Certs 2 64
This article assumes you have at least one Cisco ASA or PIX configured with working internet and a non-dynamic, public, address on the outside interface. If you need instructions on how to enable your device for internet, or basic configuration info…
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question