sreiner
asked on
Problem: 2 Letters for 1 Drive
I recently installed a 3rd 60GB hard drive in my system on a PCI controller card (Primary Master - only device on cable). My other 2 drives are the Primary Master and Primary Slave on the motherboard controller. Now, in My Computer I see 4 60 GB hard drives (I only have 3). I noticed that letters H: and J: are the same drive. When I copy a file to one it does not show up in the other. Of course, I do not want two letters for one drive. Does anyone have any idea how to remedy this problem? Thanks!
sreiner
sreiner
Use Disk Management as haoss said, remove the disk's and rescan them in.
Are there any other settings for your PCI controller card that might effect it?
Are there any other settings for your PCI controller card that might effect it?
ASKER
I cloned one of the disks using ghost and the problem has solved itself! Thanks for the help anyway.
ASKER
I would like to close this question and have my points refunded since the problem solved itself (see above). Thanks.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Or you can try to control panel-->administrative Tools--> Computer management ---> Disk management
What OS you use?