Solved

using ras connect to all the systems at once

Posted on 2003-11-03
3
244 Views
Last Modified: 2010-04-11
hai all
i am having a windows 2000server and 5 98se
clients i implemented ras on these systems using
single telephone now what i can do is just  dail the number of the windows 2000system and connect through  only one 98system dialing form the second time its engaged. only one system is possible
                       but

what i want to do is i want to dail from all the five
systems to only one phone number(i.e windows 2000) at a single and i want to connect all the systems at same time

please help is it possible if so how  this process is in the ship
0
Comment
Question by:kvkvamsi
3 Comments
 
LVL 35

Accepted Solution

by:
ShineOn earned 27 total points
ID: 9679125
What you need to do for multi-line dialup is have five separate phone lines with five separate modems (or a digiboard card) connecting to your RAS server.  Then you configure those five phone lines to all respond to the same phone number.

Sometimes that can be done internally - it depends on the phone system you use.  Most often, you have to order it directly from your phone company.

The terminology I remember is a "hunt group."  What happens is you dial the one number, and the phone company's system will "hunt" for an available line within the group of lines you have installed and set up that way, and the first one it hits that is available, connects.
0

Featured Post

Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

827 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question