Solved

Ike / Ipsec windows server 2000

Posted on 2003-11-04
1
555 Views
Last Modified: 2010-04-12
hello,

i have a router to router vpn into a windows server 2000 machine. how do i configure windows 2000 server to accept the traffic as if those users were on the local network (eg access to shared drives, etc) . like it would accept software based vpn directy into the serve and give those users local network access.
the routers are using Ike/Ipsec

thanks
0
Comment
Question by:tryonix
1 Comment
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 9690058
If there is no domain trust relationship with the other LAN, or only workgroups, then either open the Guest account on the server, or create individual username/password for all users.
Make sure the other users can ping it so that you know the routing is working. Your server needs to know where to route packets to the remote subnet.

If you want browsing through network neighborhood, then you need a common name resolution scheme - WINS or DDNS...

Some background information:
Microsoft Browsing

How Browsing a Wide Area Network Works:
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q117633&

Troubleshooting the Microsoft Computer Browser Service
http://support.microsoft.com/default.aspx?scid=kb%3ben-us%3b134304
http://support.microsoft.com/default.aspx?scid=kb;en-us;188305

http://support.microsoft.com/default.aspx?scid=kb;en-us;136712
http://support.microsoft.com/default.aspx?scid=kb;en-us;102878

WINS:
http://support.microsoft.com/?kbid=185786
http://www.microsoft.com/ntserver/techresources/commnet/WINS/WINSwp98/WINS02-12.asp

Problems with workgroup networking in XP:

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q308007


Problems seeing workgroups when connected to a router:

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q315978

0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
Some of you may have heard that SonicWALL has finally released an app for iOS devices giving us long awaited connectivity for our iPhone's, iPod's, and iPad's. This guide is just a quick rundown on how to get up and running quickly using the app. …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question