Solved

Partiton magic  version 8.0 having error 1523 while executing batch

Posted on 2003-11-05
5
844 Views
Last Modified: 2012-05-04
I followed the partition magic 8.0 wizard to partition my hard disk while rebooting  I came across this problem  "error 1523 while executing batch"
What can I do to solve this problem.
0
Comment
Question by:joe-joe
  • 2
5 Comments
 
LVL 44

Accepted Solution

by:
CrazyOne earned 125 total points
ID: 9685103
http://www.powerquest.com/support/primus/id4536.cfm

Solution: Error 1523 Cluster beyond end

In this instance, the problem can be resolved by running CHKDSK /R on the affected drive.

For instructions on running CHKDSK, see PowerQuest Solution 2553.


If the error persists after you have applied the recommended fix, please send the following information to PowerQuest Technical Support:

- A Debug report (see PowerQuest Solution 101, "Running a Debug Report").
- A PARTINFO report created by you. (For information on using PARTINFO, see PowerQuest Solution 62, "Running a PartitionInfo.")
- The information outlined in PowerQuest Solution 102, "Information Needed for a Trouble Report."
- (If you are running PartitionMagic 6 under Windows Me) The VFNSTDBG.TXT file located in C:\Program Files\PowerQuest\PartitionMagic 6.0\Win9X\VFD.
- A copy of the contents of the Master Boot Record captured with WRPROG.EXE. (For information on using WRPROG, see PowerQuest Solution 777, "Instructions for Using the WRPROG.EXE Utility.")
- An SSO image of the affected drive (see PowerQuest Solution 227, "Running FSIMAGE").
0
 
LVL 44

Expert Comment

by:CrazyOne
ID: 9685108
Boot to the Recovery console and run this command

chkdsk /r

Description of the Windows 2000 Recovery Console
http://support.microsoft.com/search/preview.aspx?scid=kb;en-us;229716

To start the Recovery Console, use any of the following methods:
Start your computer with the Windows 2000 Setup floppy disks, or with the Windows 2000 CD-ROM. At the "Welcome to Setup" screen, press F10, or press R to repair, and then C to start the Recovery Console.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
When we purchase storage, we typically are advertised storage of 500GB, 1TB, 2TB and so on. However, when you actually install it into your computer, your 500GB HDD will actually show up as 465GB. Why? It has to do with the way people and computers…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
The Email Laundry PDF encryption service allows companies to send confidential encrypted  emails to anybody. The PDF document can also contain attachments that are embedded in the encrypted PDF. The password is randomly generated by The Email Laundr…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question