Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 379
  • Last Modified:

PIX and a cingle public address

Is it feasible to configure a PIX to use a single public IP and
a) Allow outbound access
b) Allow inbound access to a web server
c) Terminate a VPN

I have my doubts that I can achieve all three, especially when the PIX is only at 5.3.1 (there isn't budget to update it)
0
fz2hqs
Asked:
fz2hqs
1 Solution
 
lrmooreCommented:
a) sure
Unfortunately, 5.3 does not support port redirection or port address static, so b) is out.
c) if you enable DES encryption. do a "show ver" and see if DES is enabled, if not, register on Cisco web site. You'll get a new activation key and instructions to reload the image so you can re-input the activation key..
https://www.cisco.com/pcgi-bin/Software/FormManager/formgenerator.pl?pid=221&fid=324
0
 
fz2hqsAuthor Commented:
Many thanks, I half expected that answer...... now to see if I can get some more money
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now