Permissions problem in Apache for Linux ERROR 403

Forbidden
You don't have permission to access / on this server.

Apache-AdvancedExtranetServer/2.0.47 (Mandrake Linux/6.3.92mdk) mod_perl/1.99_09 Perl/v5.8.1 mod_ssl/2.0.47 OpenSSL/0.9.7b PHP/4.3.2 Server at <removed> Port 80

-------------------------------------------------------------------------

I know this same problem is all over this site, but none of the solutions I have tried have worked.

I have installed Apache recently, and had a site working fine (phpBB2). However, I have somehow managed to lose permissions to browse the root site, and any other sites I add.

I can still see the /phpBB2 site with no problems. However, when I try to log in, I get the same message for the file /index.php. Then, after the error, if I go back to the /phpBB2 site root, I can see all the forums and I AM logged in. After that, everything on the phpBB2 site seems to work okay.

I cant see the root server, or my catalog site (which is OS Commerce). I get the above error when trying to access any page, either one that exists, or one that doesnt.

I am pasting some of my config files below so you can disect them and hopefully get back to me with some idea of what is wrong. I have also done a paste of some permissions of folders I think may have something to do with it.

I have been chmod'ing like crazy, and have probably screwed the permissions up completely now. I have also deleted any .htaccess files I found, as I couldnt get it working at all, and thought I may have done something silly (Im sure I have now).

I have tried uninstalling Apache, but RPMdrake tells me it would break my server, and quits me out. I suppose a full /var/www/ reset on permissions would be good. If I dont get this fixed today, I am going to re-install mandrake 9.2 and start from scratch (not fun).

The error log (right at the bottom of this paste) says the problem is down to server configuration.

Sorry for the massive post, but I figured the more information you have, the faster it will be to solve.

PLEASE HELP!!!

-------------------------------------------------------------------------
WEB ROOT FOLDER

[root@localhost html]# ls -al
total 44
drwxrwxrwx    6 apache   apache       4096 Nov 10 12:13 ./
drwxr-xr-x    7 apache   apache       4096 Nov  6 09:37 ../
drwxrwxrwx    2 apache   apache       4096 Nov 10 11:05 addon-modules/
drwxrwxrwx    8 apache   apache       4096 Nov 10 19:16 catalog/
-rwxrwxrwx    1 apache   apache       1406 Sep 16 02:55 favicon.ico*
-rwxrwxrwx    1 apache   apache       6295 Sep 16 02:55 index.shtml*
-rwxrwxrwx    1 apache   apache        153 Sep 16 02:55 optim.html*
drwxrwxrwx   12 apache   apache       4096 Nov  6 18:38 phpBB2/
-rwxrwxrwx    1 apache   apache        609 Sep 16 02:55 platform.html*
drwxrwxrwx    7 apache   apache       4096 Nov  6 16:13 siteadminmysql/

-------------------------------------------------------------------------
PHP BB FOLDER

[root@localhost phpBB2]# ls -al
total 428
drwxrwxrwx   12 apache   apache       4096 Nov  6 18:38 ./
drwxrwxrwx    6 apache   apache       4096 Nov 10 12:13 ../
drwxrwxrwx    2 apache   apache       4096 Nov  6 16:05 admin/
drwxrwxrwx    2 apache   apache       4096 Nov  6 16:05 cache/
-rwxrwxrwx    1 apache   apache       5051 Nov  6 16:05 common.php*
-rwxrwxrwx    1 apache   apache        267 Nov  6 16:32 config.php*
drwxrwxrwx    2 apache   apache       4096 Nov  6 16:05 db/
drwxrwxrwx    2 apache   apache       4096 Nov  6 16:05 docs/
drwxrwxrwx    4 apache   apache       4096 Nov  6 18:38 Elektro/
-rwxrwxrwx    1 apache   apache        810 Nov  6 16:05 extension.inc*
-rwxrwxrwx    1 apache   apache       3596 Nov  6 16:05 faq.php*
-rwxrwxrwx    1 apache   apache      45500 Nov  6 16:05 groupcp.php*
drwxrwxrwx    4 apache   apache       4096 Nov  6 16:05 images/
drwxrwxrwx    2 apache   apache       4096 Nov  6 16:05 includes/
-rwxrwxrwx    1 apache   apache      14332 Nov  6 16:05 index.php*
drwxrwxrwx    3 apache   apache       4096 Nov  6 16:05 language/
-rwxrwxrwx    1 apache   apache       6864 Nov  6 16:05 login.php*
-rwxrwxrwx    1 apache   apache      12102 Nov  6 16:05 memberlist.php*
-rwxrwxrwx    1 apache   apache      37609 Nov  6 16:05 modcp.php*
drwxrwxrwx    3 apache   apache       4096 Nov  6 18:03 mods/
-rwxrwxrwx    1 apache   apache      34208 Nov  6 16:05 posting.php*
-rwxrwxrwx    1 apache   apache      72647 Nov  6 16:05 privmsg.php*
-rwxrwxrwx    1 apache   apache       3719 Nov  6 16:05 profile.php*
-rwxrwxrwx    1 apache   apache      42367 Nov  6 16:05 search.php*
drwxrwxrwx    4 apache   apache       4096 Nov  6 18:10 templates/
-rwxrwxrwx    1 apache   apache      23138 Nov  6 16:05 viewforum.php*
-rwxrwxrwx    1 apache   apache       7232 Nov  6 16:05 viewonline.php*
-rwxrwxrwx    1 apache   apache      45009 Nov  6 16:05 viewtopic.p

-------------------------------------------------------------------------
OS COMMERCE FOLDER

[root@localhost catalog]# ls -al
total 528
drwxrwxrwx    8 apache   apache       4096 Nov 10 19:16 ./
drwxrwxrwx    6 apache   apache       4096 Nov 10 12:13 ../
-rwxrwxrwx    1 apache   apache      12039 Nov 10 12:13 account_edit.php*
-rwxrwxrwx    1 apache   apache      11563 Nov 10 12:13 account_history_info.php*
-rwxrwxrwx    1 apache   apache       7530 Nov 10 12:13 account_history.php*
-rwxrwxrwx    1 apache   apache       7188 Nov 10 12:13 account_newsletters.php*
-rwxrwxrwx    1 apache   apache      11310 Nov 10 12:13 account_notifications.php*
-rwxrwxrwx    1 apache   apache       8224 Nov 10 12:13 account_password.php*
-rwxrwxrwx    1 apache   apache      11418 Nov 10 12:13 account.php*
-rwxrwxrwx    1 apache   apache       9044 Nov 10 12:13 address_book.php*
-rwxrwxrwx    1 apache   apache      18257 Nov 10 12:13 address_book_process.php*
drwxrwxrwx    4 apache   apache       4096 Nov 10 19:16 admin/
-rwxrwxrwx    1 apache   apache      10344 Nov 10 12:13 advanced_search.php*
-rwxrwxrwx    1 apache   apache      14575 Nov 10 12:13 advanced_search_result.php*
-rwxrwxrwx    1 apache   apache      16065 Nov 10 12:13 checkout_confirmation.php*
-rwxrwxrwx    1 apache   apache      22061 Nov 10 12:13 checkout_payment_address.php*
-rwxrwxrwx    1 apache   apache      17363 Nov 10 12:13 checkout_payment.php*
-rwxrwxrwx    1 apache   apache      16325 Nov 10 12:13 checkout_process.php*
-rwxrwxrwx    1 apache   apache      22096 Nov 10 12:13 checkout_shipping_address.php*
-rwxrwxrwx    1 apache   apache      20323 Nov 10 12:13 checkout_shipping.php*
-rwxrwxrwx    1 apache   apache       6883 Nov 10 12:13 checkout_success.php*
-rwxrwxrwx    1 apache   apache       3436 Nov 10 12:13 conditions.php*
-rwxrwxrwx    1 apache   apache       6413 Nov 10 12:13 contact_us.php*
-rwxrwxrwx    1 apache   apache       3779 Nov 10 12:13 cookie_usage.php*
-rwxrwxrwx    1 apache   apache      22534 Nov 10 12:13 create_account.php*
-rwxrwxrwx    1 apache   apache       3919 Nov 10 12:13 create_account_success.php*
drwxrwxrwx    2 apache   apache       4096 Nov 10 19:17 download/
-rwxrwxrwx    1 apache   apache       4229 Nov 10 12:13 download.php*
drwxrwxrwx   13 apache   apache       4096 Nov 10 12:13 images/
drwxrwxrwx    8 apache   apache       4096 Nov 10 19:21 includes/
-rwxrwxrwx    1 apache   apache      18957 Nov 10 12:13 index.php*
-rwxrwxrwx    1 apache   apache       1443 Nov 10 12:13 info_shopping_cart.php*
drwxrwxrwx    5 apache   apache       4096 Nov 10 12:13 install/
-rwxrwxrwx    1 apache   apache      10492 Nov 10 12:13 login.php*
-rwxrwxrwx    1 apache   apache       3837 Nov 10 12:13 logoff.php*
-rwxrwxrwx    1 apache   apache       6313 Nov 10 12:13 password_forgotten.php*
-rwxrwxrwx    1 apache   apache       1494 Nov 10 12:13 popup_image.php*
-rwxrwxrwx    1 apache   apache       1384 Nov 10 12:13 popup_search_help.php*
-rwxrwxrwx    1 apache   apache       3560 Nov 10 12:13 privacy.php*
-rwxrwxrwx    1 apache   apache      12873 Nov 10 12:13 product_info.php*
-rwxrwxrwx    1 apache   apache       9613 Nov 10 12:13 product_reviews_info.php*
-rwxrwxrwx    1 apache   apache      11229 Nov 10 12:13 product_reviews.php*
-rwxrwxrwx    1 apache   apache      11228 Nov 10 12:13 product_reviews_write.php*
-rwxrwxrwx    1 apache   apache       6939 Nov 10 12:13 products_new.php*
drwxrwxrwx    2 apache   apache       4096 Nov 10 19:22 pub/
-rwxrwxrwx    1 apache   apache       2841 Nov 10 12:13 redirect.php*
-rwxrwxrwx    1 apache   apache       7494 Nov 10 12:13 reviews.php*
-rwxrwxrwx    1 apache   apache       3563 Nov 10 12:13 shipping.php*
-rwxrwxrwx    1 apache   apache      11507 Nov 10 12:13 shopping_cart.php*
-rwxrwxrwx    1 apache   apache       5711 Nov 10 12:13 specials.php*
-rwxrwxrwx    1 apache   apache       3259 Nov 10 12:13 ssl_check.php*
-rwxrwxrwx    1 apache   apache       5859 Nov 10 12:13 stylesheet.css*
-rwxrwxrwx    1 apache   apache      10239 Nov 10 12:13 tell_a_friend.php*

-------------------------------------------------------------------------
ETC/HTTPD/2.0/CONF/HTTPD2.CONF

### Main Configuration Section
### You really shouldn't change these settings unless you're a guru
###
ServerRoot /etc/httpd/2.0
ServerName <removed>
#LockFile /etc/httpd/httpd.lock
PidFile /var/run/httpd.pid
ErrorLog logs/error_log
LogLevel warn
DocumentRoot /var/www/html


### Dynamic Shared Object (DSO) Support
###
### You should always leave those three, as they are needed for
### normal use.
### mod_access (Order, Allow, etc..)
### mod_log_config (Transferlog, etc..)
### mod_mime (AddType, etc...)

LoadModule access_module      modules/mod_access.so
LoadModule auth_module            modules/mod_auth.so
LoadModule auth_anon_module      modules/mod_auth_anon.so
##LoadModule auth_dbm_module      modules/mod_auth_dbm.so
LoadModule auth_digest_module      modules/mod_auth_digest.so
##LoadModule charset_lite_module      modules/mod_charset_lite.so
##LoadModule case_filter_module      modules/mod_case_filter.so
##LoadModule case_filter_in_module      modules/mod_case_filter_in.so
##LoadModule ext_filter_module      modules/mod_ext_filter.so
LoadModule include_module      modules/mod_include.so
LoadModule log_config_module      modules/mod_log_config.so
##LoadModule logio_module            modules/mod_logio.so
LoadModule env_module            modules/mod_env.so
##LoadModule mime_magic_module      modules/mod_mime_magic.so
##LoadModule cern_meta_module      modules/mod_cern_meta.so
LoadModule expires_module      modules/mod_expires.so
LoadModule headers_module      modules/mod_headers.so
LoadModule usertrack_module      modules/mod_usertrack.so
##LoadModule unique_id_module      modules/mod_unique_id.so
LoadModule setenvif_module      modules/mod_setenvif.so
LoadModule mime_module            modules/mod_mime.so
LoadModule status_module      modules/mod_status.so
LoadModule autoindex_module      modules/mod_autoindex.so
LoadModule asis_module            modules/mod_asis.so
LoadModule info_module            modules/mod_info.so
LoadModule cgi_module            modules/mod_cgi.so
##LoadModule cgid_module            modules/mod_cgid.so
LoadModule vhost_alias_module      modules/mod_vhost_alias.so
LoadModule negotiation_module      modules/mod_negotiation.so
LoadModule dir_module            modules/mod_dir.so
LoadModule imap_module            modules/mod_imap.so
LoadModule actions_module      modules/mod_actions.so
##LoadModule speling_module      modules/mod_speling.so
LoadModule userdir_module      modules/mod_userdir.so
LoadModule alias_module            modules/mod_alias.so
LoadModule rewrite_module      modules/mod_rewrite.so

###
### Global Configuration
###
# We now support multiple apache configurations on the same server. In
# common.conf, we put all directives that are common to all implementations
# (httpd, httpd-perl, etc.)
# For Apache2 we load all conf files in conf.d
Include /etc/httpd/conf.d/*.conf
Include conf/commonhttpd.conf


###
### IP Address/Port and Proxied configuration section
###
# The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
# are using a proxy or accelerator, like the Apache-SGI or khttpd, so that
# the fast web server serves static content while Apache handles the
# cgi or php files

#BindAddress *
<IfDefine APACHEPROXIED>
    Listen 8080
</IfDefine>
<IfDefine !APACHEPROXIED>
    Listen 80
</IfDefine>

# Likewise, we can set apache as the server by default and send perl
# requests via ProxyPass to apache-mod_perl. It increases performance
# since the perl interpreter is only used for perl and the standard apache
# does all the html and image files, with a smaller footprint.
#
# If you install apache and apache-mod_perl, this is the default config.
# If you don't want two web servers to use perl, uninstall apache, and
# apache-mod_perl will not be proxied.

<IfDefine PERLPROXIED>
<IfModule mod_rewrite.c>
    RewriteEngine on
    RewriteRule ^proxy:.*  -  [F]
    RewriteRule ^(.*\/perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
    RewriteRule ^(.*\/cgi-perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
</IfModule>
</IfDefine>

###
### Log configuration Section
###

<IfModule mod_log_config.c>
#Single logfile with access, agent and referer information
#This is the default, if vlogs are not defined for the main server
CustomLog logs/access_log combined env=!VLOG
#If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
</IfModule>

###
### Virtual Hosts
###
# We include different templates for Virtual Hosting. Have a look in the
# vhosts directory and modify to suit your needs.
Include conf/vhosts/Vhosts.conf
#Include conf/vhosts/DynamicVhosts.conf
#Include conf/vhosts/VirtualHomePages.conf


###
### Performance settings Section
###
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15


# prefork MPM [THIS IS THE DEFAULT]
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers         5
MinSpareServers      5
MaxSpareServers     10
MaxClients         150
MaxRequestsPerChild  0
</IfModule>


# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         2
MaxClients         150
MinSpareThreads     25
MaxSpareThreads     75
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers           5
StartThreads         5
MinSpareThreads      5
MaxSpareThreads     10
MaxThreadsPerChild  20
MaxRequestsPerChild  0
</IfModule>

-------------------------------------------------------------------------
/ETC/HTTPD/2.0/CONF/COMMONHTTPD.CONF

### Common server configuration
#
User apache
Group apache

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin my email address - removed

# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
# DO NOT MODIFY THIS ONE, USE httpd.conf and httpd-perl.conf
#DocumentRoot /var/www/html


#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.  
#
# Also, for security, we disable indexes globally
#
#<Directory />
#    Options -Indexes FollowSymLinks
#    AllowOverride None
#</Directory>

#Restricted set of options
<Directory />
  Options -All -Multiviews
  AllowOverride None
  <IfModule mod_access.c>
    Order deny,allow
    Deny from all
  </IfModule>
</Directory>


#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#


#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
    UserDir public_html
</IfModule>

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
    DirectoryIndex index.html index.html.var index.php index.php3 index.shtml index.cgi index.pl index.htm Default.htm default.htm index.xml
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<IfModule mod_access.c>
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>
</IfModule>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
    TypesConfig conf/apache-mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#
# EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is
# used  to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#
#EnableSendfile off

# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
<IfModule mod_log_config.c>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost

    <IfModule mod_logio.c>

    # You need to enable mod_logio.c to use %I and %O
    #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
#CustomLog logs/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access_log combined
</IfModule>

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
<IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/"..
    #
    Alias /icons/ /var/www/icons/
    Alias /doc /usr/share/doc


    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ /var/www/cgi-bin/
    ScriptAlias /protected-cgi-bin/ /var/www/protected-cgi-bin/

    <IfModule mod_perl.c>
      #Provide two aliases to the same cgi-bin directory,
      #to see the effects of the 2 different mod_perl modes
      #for Apache::Registry Mode
      Alias /perl/ /var/www/perl/
      #for Apache::Perlrun Mode
      Alias /cgi-perl/ /var/www/perl/
    </IfModule>


</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory indexing or standard
    #
    <IfDefine !APACHE2>
      IndexOptions FancyIndexing NameWidth=*
    </IfDefine>
    <IfDefine APACHE2>
      IndexOptions FancyIndexing VersionSort NameWidth=*
    </IfDefine>
    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.png) text/*
    AddIconByType (IMG,/icons/image2.png) image/*
    AddIconByType (SND,/icons/sound2.png) audio/*
    AddIconByType (VID,/icons/movie.png) video/*

    AddIcon /icons/binary.png .bin .exe
    AddIcon /icons/binhex.png .hqx
    AddIcon /icons/tar.png .tar
    AddIcon /icons/world2.png .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.png .Z .z .tgz .gz .zip .bz2
    AddIcon /icons/a.png .ps .ai .eps
    AddIcon /icons/layout.png .html .shtml .htm .pdf
    AddIcon /icons/text.png .txt
    AddIcon /icons/c.png .c
    AddIcon /icons/p.png .pl .py .php .php3
    AddIcon /icons/f.png .for
    AddIcon /icons/dvi.png .dvi
    AddIcon /icons/uuencoded.png .uu
    AddIcon /icons/script.png .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.png .tex
    AddIcon /icons/bomb.png core

    AddIcon /icons/back.png ..
    AddIcon /icons/hand.right.png README
    AddIcon /icons/folder.png ^^DIRECTORY^^
    AddIcon /icons/blank.png ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.png

    #
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes.  These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    #
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found.  If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    #
    ReadmeName README.html
    HeaderName HEADER.html

    #
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing.  Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

    #
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz

    #
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.  
    #
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    #
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    #
    AddLanguage ca .ca
    AddLanguage cs .cz .cs
    AddLanguage da .dk
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage en .en
    AddLanguage eo .eo
    AddLanguage es .es
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage he .he
    AddLanguage hr .hr
    AddLanguage it .it
    AddLanguage ja .ja
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddLanguage ltz .ltz
    AddLanguage ltz .lu
    AddLanguage nl .nl
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddLanguage pt-br .pt-br
    AddLanguage pt .pt
    AddLanguage ru .ru
    AddLanguage sv .sv
    AddLanguage zh-TW .zh-tw
    AddLanguage eo .eo

    #
    # Specify a default charset for all pages sent out. This is
    # always a good idea and opens the door for future internationalisation
    # of your web site, should you ever want it. Specifying it as
    # a default does little harm; as the standard dictates that a page
    # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
    # are merely stating the obvious. There are also some security
    # reasons in browsers, related to javascript and URL parsing
    # which encourage you to always set a default char set.
    #
    #AddDefaultCharset ISO-8859-1
    # JMD 2003/09/15 Change to off, since it overrides the META tags
    AddDefaultCharset Off

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    #
    <IfModule mod_negotiation.c>
        LanguagePriority en cs de es fr it da nl et el ja kr no pl pt pt-br ru ltz ca sv tw ro
#      ForceLanguagePriority Prefer Fallback
    </IfModule>

    #
    # ForceLanguagePriority allows you to serve a result page rather than
    # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
    # [in case no accepted languages matched the available variants]
    #
    <IfModule mod_negotiation.c>
#FUK      ForceLanguagePriority Prefer Fallback
    </IfModule>

    #
    # Commonly used filename extensions to character sets. You probably
    # want to avoid clashes with the language extensions, unless you
    # are good at carefully testing your setup after each change.
    # See http://www.iana.org/assignments/character-sets for the
    # official list of charset names and their respective RFCs.
    #
    AddCharset ISO-8859-1  .iso8859-1  .latin1
    AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
    AddCharset ISO-8859-3  .iso8859-3  .latin3
    AddCharset ISO-8859-4  .iso8859-4  .latin4
    AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
    AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
    AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
    AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
    AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
    AddCharset ISO-2022-JP .iso2022-jp .jis
    AddCharset ISO-2022-KR .iso2022-kr .kis
    AddCharset ISO-2022-CN .iso2022-cn .cis
    AddCharset Big5        .Big5       .big5
    # For russian, more than one charset is used (depends on client, mostly):
    AddCharset WINDOWS-1251 .cp-1251   .win-1251
    AddCharset CP866       .cp866
    AddCharset KOI8-r      .koi8-r .koi8-ru
    AddCharset KOI8-ru     .koi8-uk .ua
    AddCharset ISO-10646-UCS-2 .ucs2
    AddCharset ISO-10646-UCS-4 .ucs4
    AddCharset UTF-8       .utf8

    # The set below does not map to a specific (iso) standard
    # but works on a fairly wide range of browsers. Note that
    # capitalization actually matters (it should not, but it
    # does for some browsers).
    #
    # See http://www.iana.org/assignments/character-sets
    # for a list of sorts. But browsers support few.
    #
    AddCharset GB2312      .gb2312 .gb
    AddCharset utf-7       .utf7
    AddCharset utf-8       .utf8
    AddCharset big5        .big5 .b5
    AddCharset EUC-TW      .euc-tw
    AddCharset EUC-JP      .euc-jp
    AddCharset EUC-KR      .euc-kr
    AddCharset shift_jis   .sjis

    #
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    #
    AddType application/x-tar .tgz
    AddType image/x-icon .ico

    #
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    AddHandler cgi-script .cgi

    #
    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    #  to be distributed in multiple languages.)
    #
    AddHandler type-map var

    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    <IfDefine APACHE2>
      AddOutputFilter INCLUDES .shtml
    </IfDefine>
    <IfDefine !APACHE2>
      AddHandler server-parsed .shtml
    </IfDefine>
    #
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.

#    Alias /error/ "/var/www/error"
#
#    <Directory "/var/www/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en es de fr sv
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

# Customizable error responses come in three flavors:
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo."
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://www.example.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.

## This should be changed to the ServerRoot/manual/.  The alias provides
## the manual, even if you choose to move your DocumentRoot.  You may comment
## this out if you do not care for the documentation.
##
#AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "/var/www/manual$1"
#
#<Directory "/var/www/manual">
#    Options Indexes
#    AllowOverride None
#    Order allow,deny
#    Allow from all
#
#    <Files *.html>
#        SetHandler type-map
#    </Files>
#
#    SetEnvIf Request_URI ^/manual/de/ prefer-language=de
#    SetEnvIf Request_URI ^/manual/en/ prefer-language=en
#    SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
#    SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
#    SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
#    SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
#    RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
#</Directory>

#
# ScriptAlias: This controls which directories contain server scripts.


<Location /manual>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system. Please install either apache-manual or apache2-manual RPMs.
</Location>
<Location /manual-2.0>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system. Please install the apache2-manual package.
</Location>
<Location /manual-1.3>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system. Please install the apache-manual package.
</Location>

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response behavior to
    # handle known problems with browser implementations.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
   
    #
    # The following directive disables redirects on non-GET requests for
    # a directory that does not include the trailing slash.  This fixes a
    # problem with Microsoft WebFolders which does not appropriately handle
    # redirects for folders with DAV methods.
    #
    BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carfully
    BrowserMatch "^WebDrive" redirect-carefully
    BrowserMatch "^gnome-vfs" redirect-carefully

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
<IfModule mod_status.c>
    <Location /server-status>
        SetHandler server-status
        <IfModule mod_access.c>
          Order deny,allow
          Deny from all
          allow from 127.0.0.1
          #Allow from .your_domain.com
        </IfModule>
    </Location>
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
</IfModule>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
<IfModule mod_info.c>
    <Location /server-info>
      SetHandler server-info
        <IfModule mod_access.c>
          Order deny,allow
        Deny from all
          allow from 127.0.0.1
#        Allow from .your_domain.com
        </IfModule>
    </Location>
</IfModule>

<IfModule mod_perl.c>
    <Location /perl-status>
      SetHandler perl-script
      <IfDefine !APACHE2>
        PerlHandler Apache::Status
      </IfDefine>
      <IfDefine APACHE2>
        PerlResponseHandler Apache::Status
      </IfDefine>
        <IfModule mod_access.c>
        Order deny,allow
        Deny from all
        Allow from 127.0.0.1
        </IfModule>
    </Location>
</IfModule>

#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org.  Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

<IfModule mod_include.c>
#    XBitHack on
</IfModule>

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/html/phpBB2">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "SymLinksifOwnerMatch", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options -Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
    AllowOverride All

#
# Controls who can get stuff from this server.
#
    <IfModule mod_access.c>
      Order allow,deny
      Allow from all
    </IfModule>
</Directory>

<Directory /var/www/perl>
    AllowOverride All
    Options -Indexes FollowSymLinks MultiViews ExecCGI
    <IfModule mod_access.c>
      Order allow,deny
      Allow from all
    </IfModule>
</Directory>

<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
#Scriptsock            /cgisock
</IfModule>

<Directory /var/www/cgi-bin>
    AllowOverride All
    Options ExecCGI
    <IfModule mod_access.c>
      Order allow,deny
      Allow from all
    </IfModule>
</Directory>

<Directory /var/www/protected-cgi-bin>
    AllowOverride All
    Options ExecCGI
    <IfModule mod_access.c>
      Order deny,allow
      Deny from all
      Allow from 127.0.0.1
      #allow from .your_domain.com
    </IfModule>
</Directory>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

# These settings are pretty flexible, and allow for Frontpage and XSSI
<Directory /home/*/public_html>
    AllowOverride All
    Options MultiViews -Indexes Includes FollowSymLinks
    <IfModule mod_access.c>
      Order allow,deny
      Allow from all
    </IfModule>
</Directory>

<Directory /home/*/public_html/cgi-bin>
    Options +ExecCGI -Includes -Indexes
    SetHandler cgi-script
    <IfModule mod_access.c>
      Order allow,deny
      Allow from all
    </IfModule>
</Directory>


<IfModule mod_perl.c>
    <Directory /home/*/public_html/perl>
      SetHandler perl-script
      <IfDefine !APACHE2>
        PerlHandler Apache::PerlRun
      </IfDefine>
      <IfDefine APACHE2>
        PerlResponseHandler ModPerl::PerlRun
      </IfDefine>
      Options -Indexes ExecCGI
      PerlSendHeader On
       <IfModule mod_access.c>
         Order allow,deny
         Allow from all
       </IfModule>
    </Directory>
</IfModule>

<Directory /var/www/icons>
    Options -Indexes MultiViews
    AllowOverride None
    <IfModule mod_access.c>
      Order allow,deny
      Allow from all
    </IfModule>
</Directory>

<Directory /usr/share/doc>
    Options Indexes FollowSymLinks
    <IfModule mod_access.c>
      Order deny,allow
      Deny from all
      Allow from 127.0.0.1
      #allow from .your_domain.com
    </IfModule>
</Directory>

<Directory /var/www/html/addon-modules>
    Options Indexes FollowSymLinks
</Directory>

<Location /index.shtml>
    Options +Includes
</Location>

<IfModule mod_perl.c>
    <IfDefine !APACHE2>
      PerlModule Apache::Registry
    </IfDefine>
   
    #set Apache::Registry Mode for /perl Alias
    <Location /perl/*.pl>
      SetHandler perl-script
      <IfDefine !APACHE2>
        PerlHandler Apache::Registry
      </IfDefine>
      <IfDefine APACHE2>
        PerlResponseHandler ModPerl::Registry
      </IfDefine>
      Options -Indexes ExecCGI
      PerlSendHeader On
    </Location>

    #set Apache::PerlRun Mode for /cgi-perl Alias
    <Location /cgi-perl/*.pl>
      SetHandler perl-script
      <IfDefine !APACHE2>
        PerlHandler Apache::PerlRun
      </IfDefine>
      <IfDefine APACHE2>
        PerlResponseHandler ModPerl::PerlRun
      </IfDefine>
      Options -Indexes ExecCGI
      PerlSendHeader On
    </Location>
</IfModule>

-------------------------------------------------------------------------
EXTRACT FROM ACCESS_LOG

127.0.0.1 - - [10/Nov/2003:19:18:21 +0000] "GET /phpBB2/templates/subSilver/images/icon_mini_message.gif HTTP/1.1" 200 232 "http://127.0.0.1/phpBB2/groupcp.php?sid=6b4caa443ae8ea1de019481b208f9032" "-"
127.0.0.1 - - [10/Nov/2003:19:18:21 +0000] "GET /phpBB2/templates/subSilver/images/icon_mini_login.gif HTTP/1.1" 200 233 "http://127.0.0.1/phpBB2/groupcp.php?sid=6b4caa443ae8ea1de019481b208f9032" "-"
127.0.0.1 - - [10/Nov/2003:19:18:26 +0000] "GET /catalog HTTP/1.1" 403 396 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:19:42 +0000] "GET /catalog HTTP/1.1" 403 396 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:19:43 +0000] "GET /catalog HTTP/1.1" 403 396 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:19:44 +0000] "GET /catalog HTTP/1.1" 403 396 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:19:48 +0000] "GET /catalog/ HTTP/1.1" 403 397 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:19:52 +0000] "GET / HTTP/1.1" 403 389 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:21:32 +0000] "GET / HTTP/1.1" 403 389 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:21:33 +0000] "GET / HTTP/1.1" 403 389 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:21:33 +0000] "GET / HTTP/1.1" 403 389 "-" "-"
127.0.0.1 - - [10/Nov/2003:19:21:34 +0000] "GET / HTTP/1.1" 403 389 "-" "-"

-------------------------------------------------------------------------
EXTRACT FROM ERROR_LOG

[Tue Nov 11 09:37:35 2003] [notice] caught SIGTERM, shutting down
[Tue Nov 11 09:45:12 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/apache2-suexec)
[Tue Nov 11 09:45:13 2003] [notice] Digest: generating secret for digest authentication ...
[Tue Nov 11 09:45:13 2003] [notice] Digest: done
[Tue Nov 11 09:45:15 2003] [notice] Apache-AdvancedExtranetServer/2.0.47 (Mandrake Linux/6.3.92mdk) mod_perl/1.99_09 Perl/v5.8.1 mod_ssl/2.0.47 OpenSSL/0.9.7b PHP/4.3.2 configured -- resuming normal operations
[Tue Nov 11 10:21:47 2003] [error] [client 127.0.0.1] client denied by server configuration: /var/www/html/index.shtml
[Tue Nov 11 10:21:51 2003] [error] [client 127.0.0.1] client denied by server configuration: /var/www/html/index.shtml
[Tue Nov 11 10:21:52 2003] [error] [client 127.0.0.1] client denied by server configuration: /var/www/html/index.shtml
[Tue Nov 11 10:30:09 2003] [error] [client 192.168.0.105] client denied by server configuration: /var/www/html/
[Tue Nov 11 10:32:12 2003] [notice] caught SIGTERM, shutting down
[Tue Nov 11 10:32:17 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/apache2-suexec)
[Tue Nov 11 10:32:17 2003] [notice] Digest: generating secret for digest authentication ...
[Tue Nov 11 10:32:17 2003] [notice] Digest: done
[Tue Nov 11 10:32:18 2003] [notice] Apache-AdvancedExtranetServer/2.0.47 (Mandrake Linux/6.3.92mdk) mod_perl/1.99_09 Perl/v5.8.1 mod_ssl/2.0.47 OpenSSL/0.9.7b PHP/4.3.2 configured -- resuming normal operations
[Tue Nov 11 10:32:51 2003] [error] [client 192.168.0.105] client denied by server configuration: /var/www/html/catalog
[Tue Nov 11 10:37:42 2003] [error] [client 192.168.0.105] client denied by server configuration: /var/www/html/
[Tue Nov 11 10:38:41 2003] [error] [client 192.168.0.105] client denied by server configuration: /var/www/html/index.php, referer: http://xxx/phpBB2/login.php?sid=e360035b65c732d319a47e0e26f671bc
[Tue Nov 11 10:38:51 2003] [error] [client 192.168.0.105] client denied by server configuration: /var/www/html/index.php, referer: http://xxx/phpBB2/login.php?sid=e360035b65c732d319a47e0e26f671bc