Solved

RRAS ping

Posted on 2003-11-13
5
300 Views
Last Modified: 2010-04-14
Hello,

I have a W2K with RRAS. I've made a W2k backup DC and a backup RRAS.

The pdc is was't congured by me.

Config>
pdc -> 192.168.1.3 and 172.16.31.101 (clients get 172.16.31.102 - 200)
bdc -> 192.168.1.4 and 172.16.31.201 (clients get 172.168.31.202 - 240)
The problem:
clients connect to pdc. ok. ping pdc it responds 192.168.1.3
clients connect to bdc. ok. ping bdc it responds 172.16.31.201

I really need the bdc to respond to ping witn 192.168.1.4
HOW CAN I DO THAT?
I think it's something with the DNS but I don't know.

Thanks
0
Comment
Question by:theo_ni
  • 2
  • 2
5 Comments
 
LVL 15

Expert Comment

by:Rob Stone
ID: 9738538
Isn't it something like the IP with 172 is the primary NIC?  Check the binding order to see if you can change it in there.
0
 

Author Comment

by:theo_ni
ID: 9738777
I have only one NIC


BDC:

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : HP NetServer 10/100TX PCI LAN Adapte
r
        Physical Address. . . . . . . . . : 00-30-6E-1F-0A-3E
        DHCP Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.1.4
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 192.168.1.4
                                            192.168.1.3
        Primary WINS Server . . . . . . . : 192.168.1.4
        Secondary WINS Server . . . . . . : 192.168.1.3

PPP adapter RAS Server (Dial In) Interface:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
        Physical Address. . . . . . . . . : 00-53-45-00-00-00
        DHCP Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 172.16.31.202
        Subnet Mask . . . . . . . . . . . : 255.255.255.255
        Default Gateway . . . . . . . . . :
        DNS Servers . . . . . . . . . . . : 127.0.0.1

PDC:

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : HP NetServer 10/100TX PCI LAN Adapte
r
        Physical Address. . . . . . . . . : 00-30-6E-36-1C-19
        DHCP Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.1.3
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 192.168.1.3
                                            192.168.1.4
        Primary WINS Server . . . . . . . : 192.168.1.3

PPP adapter RAS Server (Dial In) Interface:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
        Physical Address. . . . . . . . . : 00-53-45-00-00-00
        DHCP Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 172.16.31.101
        Subnet Mask . . . . . . . . . . . : 255.255.255.255
        Default Gateway . . . . . . . . . :
        DNS Servers . . . . . . . . . . . : 127.0.0.1
0
 
LVL 15

Accepted Solution

by:
Rob Stone earned 245 total points
ID: 9738800
If I get a chance I will do the same setup on my RRAS server and see if I get the same response.
0
 

Author Comment

by:theo_ni
ID: 9738829
A normally configured RRAS should reply 172.16.31.101.

Someone modified the pdc to reply 192.168.1.3.

It doesn't matter why, but I really make to do this change.
0

Featured Post

Free eBook: Backup on AWS

Everything you need to know about backup and disaster recovery with AWS, for FREE!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
While it may be true that the internet is a place of possibilities, it is also a hostile environment lurking with many dangers. By clicking on the wrong link, trusting the wrong person or using a weak password, you are virtually inviting hackers to …
This video shows how to use Hyena, from SystemTools Software, to bulk import 100 user accounts from an external text file. View in 1080p for best video quality.

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question