Solved

Anyone had luck geting a u.s. robotics 56k modem to work, .... with Lindows?

Posted on 2003-11-19
1
640 Views
Last Modified: 2013-12-06
NUMBER OF MODEMS FOUND = 1
MODEM #1:
PCI CONFIGURATION INFORMATION READ:
VENDOR ID : 12B9
DEVICE ID : 1007
SUBVENDOR ID : 12B9
SUBDEVICE ID : 00C2
REVISION ID : 00

DEDUCED INFORMATION:
VENDOR NAME : UNKNOWN
DEVICE NAME : UNKNOWN
SUBVENDOR NAME : UNKNOWN
MODEM TYPE : HCF
WINXP INBUILD SUPPORT : NO

CJEMUL-35731-M5-E

Analog Devices AD1807/1804

--------------------------------------------------------------------------------

Chipset data:
Manufacturer
Analog Devices, Inc., a custom chipset for 3Com, based on the ADSP-2189.
Datasheet not available
Applications
Controllerless modem, small footprint
Identifiers
PCI vendor ID: 12B9, PCI device ID: 1007


Components
AD1807 Data Pump
AD1804 Silicon DAA
AD1803 Voice Codec 24-pin TSSOP (optional)

     
0
Comment
Question by:roosterup
1 Comment
 
LVL 12

Accepted Solution

by:
paullamhkg earned 20 total points
ID: 9785052
Have  a check here to see this info can help http://linmodems.technion.ac.il/linmodem-howto/linmodem-howto-1.html 
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Little introduction about CP: CP is a command on linux that use to copy files and folder from one location to another location. Example usage of CP as follow: cp /myfoder /pathto/destination/folder/ cp abc.tar.gz /pathto/destination/folder/ab…
Fine Tune your automatic Updates for Ubuntu / Debian
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Connecting to an Amazon Linux EC2 Instance from Windows Using PuTTY.

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question