• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 2940
  • Last Modified:

Access to CISCO PIX firewall via GUI

I want to be able to access the web interface for my PIX firewall/router from any internal network address.  What is the command line syntax for this?
0
FunkiNATEr
Asked:
FunkiNATEr
1 Solution
 
shivsaCommented:
http://www.darkplaces.co.uk/webbase/cisco/pix/pdm/index.htm

http://www.netcraftsmen.net/welcher/papers/pix02.html

you can configure Telnet to the PIX.  Permitting Telnet access to the PIX is only allowed from the inside interface.  Any sessions that attempt to initiate from the outside interface must be IPsec.  If they
are not IPsec, they are rejected

PIX Device Manager (PDM) GUI uses SSL when connecting to the PIX.  PDM is a
v6.0 add-on (a separate file from the PIX OS).  You can use this from the
inside or the outside interface.  The IPsec session is still a requirement
for outside access.  use PDM to manage a number of PIXen.  Be careful though, some PCs cannot handle running multiple SSL sessions well (more memory?).
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Managing Security Policy in a Changing Environment

The enterprise network environment is evolving rapidly as companies extend their physical data centers to embrace cloud computing and software-defined networking. This new reality means that the challenge of managing the security policy is much more dynamic and complex.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now