Solved

RDS problems

Posted on 2003-11-24
2
584 Views
Last Modified: 2013-11-21
Hello,

I have a Windows 2000 server running IIS 5.0. About three weeks ago the server was rebuilt.  Today I have had complaints from my programmers that they cannot perform certain functions involving RDS.

The first error that I was getting was 2147024891 RDS Server error: The server has denied access to the default RDS handler used to access this page. I went into IIS and the properties of the MSADC virtual directory.  On the Directory Security tab I checked the granted access radio button.  This did not work.

I also went into explorer and checked the properties of msadc under program files to make sure that everyone was there with read access, of course there were other names as well.

I then did a search for the MSDFMAP.ini and when I found it I opened it and changed the [connect default] access=NoAccess to access=ReadWrite. This did not completely work.

I then went into IIS and removed the VD MSADC and re-added it.  Checking all the properites etc before doing so to make sure that they would be the same when it was recreated.  I left all of the settings to the default after re-adding it.

The problem now after doing all of this is that the data factory query function returns nothing and to make it harder to figure out it is not generating an error either.  Please help!! They have a demo today and need this to work.

any suggestions sincerely appreciated!!

0
Comment
Question by:hlmadmin
2 Comments
 
LVL 18

Accepted Solution

by:
chicagoan earned 250 total points
ID: 9813576
0
 

Author Comment

by:hlmadmin
ID: 9818261
I have reposted under Programming, thank you for all your efforts!
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question