Solved

Certain RF modems not connecting through USB

Posted on 2003-11-24
3
183 Views
Last Modified: 2013-12-27
We have a series of RF modems (Enfora & Data Radio) that do not connect properly though our USB port on our docking device. These same modems connect well through our conventional DB9 serial port. I have looked at a USB to serial adaptors to eliminate the problem?? What is the better sollution?

JAD4343
0
Comment
Question by:jad4343
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 17

Accepted Solution

by:
rayt333 earned 250 total points
ID: 9828736
The only better solution is to switch to USB modems (costly) or buy computers that still have the serial ports (sometimes not a choice).
0

Featured Post

[Webinar] Learn How Hackers Steal Your Credentials

Do You Know How Hackers Steal Your Credentials? Join us and Skyport Systems to learn how hackers steal your credentials and why Active Directory must be secure to stop them. Thursday, July 13, 2017 10:00 A.M. PDT

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you’re like me and you like peace and quiet, saving money, and pretty lights, then this article is for you. For financial reasons, I buy all the Cisco equipment for my home lab second-hand. The first thing to wear out is usually one of the coo…
Do you have a computer or other electronic gear that is attached to a rat nest of cables, or alternatively have your cables all bundled nice at neat?  If so then read this post to sidstep common pitfalls. When I was a student at DeVry University,…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question