Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

event viewer Netlogon error 5513

Posted on 2003-11-25
3
Medium Priority
?
14,463 Views
Last Modified: 2012-06-21
Hello,

I continue to get the following error in Event viewer for only one user.

Source: NETLOGON
Event ID: 5513

The computer "computer name" tried to connect to the server "server name" using the trust relationship established by the "domain name" domain.  However, the computer lost the correct security identifier (SID) when the domain was reconfgured.  Reestablish the trust relationship.

This user has an XP machine.  Our server was rebuilt about three weeks ago which is part of the reason why this has happened.  To fix this on other XP machines I have gone through the process of removing them from the domain putting them in a workgroup and then re-adding them to the domain. The only problem with this is that XP creates a new profile when you do this and it takes a while on some machines to get this straightened out.  

Is there an easier way to fix this error without having to go through all of that?
0
Comment
Question by:hlmadmin
3 Comments
 
LVL 49

Accepted Solution

by:
sunray_2003 earned 500 total points
ID: 9818434
Dear hlmadmin,

Check this

http://www.eventid.net/display.asp?eventid=5513&eventno=484


Thanks,
Sunray
0
 
LVL 18

Expert Comment

by:chicagoan
ID: 9818451
0
 

Author Comment

by:hlmadmin
ID: 9852413
Thanks for your support!!
0

Featured Post

Prepare for your VMware VCP6-DCV exam.

Josh Coen and Jason Langer have prepared the latest edition of VCP study guide. Both authors have been working in the IT field for more than a decade, and both hold VMware certifications. This 163-page guide covers all 10 of the exam blueprint sections.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Unable to change the program that handles the scan event from a network attached Canon/Brother printer/scanner. This means you'll always have to choose which program handles this action, e.g. ControlCenter4 (in the case of a Brother).
In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

926 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question