Solved

net use problems: error 67

Posted on 2003-11-28
7
639 Views
Last Modified: 2013-12-28
Hi,
I am writing a login script for a mixed domain.
When I use the command
net use j: \\servername\share
on w2000 clients I have no problems, on WNT clients it gives me the error 67: "Network name not found"
I read it can be due to another netbios server, different from a windows server.
Is there a way to solve this problem? I tried also with server IP_addr, with no luck.
In other case, is there a way to map a network connection during boot?
Do you think that using the "use" command in kixtart I will obtain anything better, o will not work in each case?
0
Comment
Question by:zanzaramannara
7 Comments
 
LVL 33

Expert Comment

by:MikeKane
ID: 9838237
From NT, can you ping the server by name?   How about by IP address?   What protocols do you use on the server in question  (TCPIP, Netbeui, IPX?)  ?      Is the server NT, 2000, 2003?   Do you have DNS, WINS?    Can your NT clients connect to any Server on your network?  

0
 

Author Comment

by:zanzaramannara
ID: 9838594
I can ping server by name and by ip addr.
Doamin servers are mixed, i.e. you can login in NT or w2000. The server where the share folders are mapped is a w2k.
NT clients can connect to any server of my network, included the server indicated. Only net use does not work to map, only for WNT clients I have problems.
I have DNS and WINS servers, and the NETBIOS protocol is activated
0
 
LVL 33

Expert Comment

by:MikeKane
ID: 9838628
You mentioned you were trying this from a logon script.    If you run a net use manuallly from the DOS prompt in NT does it work or does it give you the same error?  

0
Are your end users making ugly email signatures?

Have you left it up to your end users to create their own email signatures? Are they forgetting to add the company logo or using garish font colors? Take control and ensure all users have the same email signature.

 

Author Comment

by:zanzaramannara
ID: 9849333
I solved, it was a sharing problem.
I discovered that in WNT you need to share the directory declared in net use, while it is not necessary in W2000...
Thanks in each case, I cannot accept any solution, as they were only questions with the aim to discover something more.
0
 

Expert Comment

by:dannycom
ID: 10085499
This is the case I'd solved before.

Make sure you've put your script in the right place in WinNT and the script has been saved a bat extionsion and  folder you've made has been share. If you something here is wrong then it will appear something error.

The script in WinNT can be stored in Winnt\System32\Repl\Import\Scripts and the script can be like this
Net use j: \\servername\share
0
 
LVL 1

Accepted Solution

by:
Computer101 earned 0 total points
ID: 12327670
PAQed, with points refunded (250)

Computer101
E-E Admin
0

Featured Post

Why are Office 365 signatures so complicated?

Trying to setup transport rules for Office 365 email signatures and can’t quite figure it out? Having to test the signature over and over? Make things simple by using Exclaimer Cloud - Signatures for Office 365.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Prevent Win 10 updates from installing 4 50
sccm report 1 38
lan speed when you have different speeds 5 49
Is there a driver update utility? 8 32
Update 11/3/2014 - Although the below article will get you to relocate the WINSXS folder, Microsoft has finally released a utility to reduce the size of the WINSXS folder. For some reason, it's not that straightforward. It only works on Windows 2008…
Today, still in the boom of Apple, PC's and products, nearly 50% of the computer users use Windows as graphical operating systems. If you are among those users who love windows, but are grappling to keep the system's hard drive optimized, then you s…
Windows 8 comes with a dramatically different user interface known as Metro. Notably missing from the new interface is a Start button and Start Menu. Many users do not like it, much preferring the interface of earlier versions — Windows 7, Windows X…
The Task Scheduler is a powerful tool that is built into Windows. It allows you to schedule tasks (actions) on a recurring basis, such as hourly, daily, weekly, monthly, at log on, at startup, on idle, etc. This video Micro Tutorial is a brief intro…

929 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now