Solved

Cisco 506E timeout question

Posted on 2003-12-01
7
293 Views
Last Modified: 2010-04-17

I have a Cisco 506E and I am running windows 2003 IIS6 behind it.

My website uses session timeouts and lately I have noticed that the sessions are not lating as long as they are set for
(30 minutes)

I was wondering if this could have something to do with the firewall??

Here are my timeout values:

timeout xlate 10:00:00
timeout conn 0:00:00 half-closed 0:00:00 udp 0:00:00 rpc 0:00:00 h225 0:00:00
timeout h323 0:00:00 mgcp 0:00:00 sip 0:00:00 sip_media 0:00:00
timeout uauth 0:00:00 absolute


Is there any chance it is the firewall causing my asp session timeout problems?
If so, is it in the values I posted?
If not.. somewhere else in the cisco config?


Thanks
0
Comment
Question by:gormly
  • 4
  • 3
7 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 125 total points
ID: 9852861
You might try setting the absolut timer to 30 minutes:

timeout uauth 0:30:00 absolute
and the connection timeouts also to a specific time (that is longer than the absolute):

timeout conn 1:00:00

0
 
LVL 79

Expert Comment

by:lrmoore
ID: 9852870
0
 
LVL 1

Author Comment

by:gormly
ID: 9853029
lrmoore
Thanks,  but I don't read gibberish :>

>> "Reference:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#1026093"


I am trying your suggestion and seeing how it works.
Hopefully it will help.

Thanks
0
6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

 
LVL 1

Author Comment

by:gormly
ID: 9867110
well
after a lot of trial an error It wasn't the firewall after all.
a corrupt IIS website.
I deleted the site out of frustration, created a new one and whalla!
No timeout problems.

Figures it was a microsoft product that was the culprit.

Irmoore
you get the points anyway because you have helped tremedously in the past.
Thanks
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 9867182
Well, thank you kind sir!
Server people are always pointing fingers at the network, when it is quite often their own problem being masked.
Have a great holiday season....
0
 
LVL 1

Author Comment

by:gormly
ID: 9867574
>> Server people are always pointing fingers at the network, when it is quite often their own problem being masked.

Who said I was a server person??

LOL.

I'm actually "a little bit of everything and not much of anything" kind of guy.
Not an expert at network but can get it running, not expert at coding, but can get dynamic pages to work
on and on....
that's why I ask so many questions here.

YOU guys are the Specific Experts.

Now ask me a question about the Tivo, DirecTV, DVD creation, Home Theatre, Miami Dolphins, Sox, Bruins, Huskies, Celtics and I can tell you no problem.
Is there a category for some of that here???

Maybe we should start a "sports"  or "Electronic Toys" section
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 9867641
Try out the lounge. Any subject is fair game, as are the responses.
LOL!
I didn't mean to say that you were a server person, just a general comment. We all need to be jack-of-all-trades...
0

Featured Post

How to improve team productivity

Quip adds documents, spreadsheets, and tasklists to your Slack experience
- Elevate ideas to Quip docs
- Share Quip docs in Slack
- Get notified of changes to your docs
- Available on iOS/Android/Desktop/Web
- Online/Offline

Join & Write a Comment

I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now