Solved

Unable to configure Toshiba Wireless LAN Mini PCI Card

Posted on 2003-12-01
11
796 Views
Last Modified: 2007-12-19
I have win2000 prof running on my machine. I have Toshiba Wireless LAN Mini PCI Card. Device Manager is showing that this device is working properly but I'm not able to connect to wireless router (Access point networking)
Looks like this card has not git configured properly.
Could any body help me how to do the same on win-2000 professional.

I was able to configure the same Toshiba Wireless LAN Mini PCI Card on Windows XP.

Thanx

Pavan
0
Comment
Question by:pavan_k_goyal
  • 5
  • 3
11 Comments
 
LVL 18

Expert Comment

by:JConchie
ID: 9859426
What is going on when you try to connect?  can you see the wireless network?  If not, go into the setup and hit the advanced button and look again for available networks.
0
 

Author Comment

by:pavan_k_goyal
ID: 9862960

It is detecting the network but it is not able to assign any ip address to wireless card.
Whenever I 'm runninh ipconfig/renew
it is giving following error

Media State.............................: Cable disconnected.

Since it is wireless card.. it should not look for cable.

Thanks






0
 

Author Comment

by:pavan_k_goyal
ID: 9863062
Wireless client manager is giving following error:

Radio link is okay but unable to retrieve AP name

Thanks
0
Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

 
LVL 18

Expert Comment

by:JConchie
ID: 9863103
It sounds like your wireless router is not configured....it needs a network name......and it probably also needs it's dhcp configured....the problem may still be a defective wireless card...but check the router first......
0
 

Author Comment

by:pavan_k_goyal
ID: 9863155
- - - - - - - Wireless network card Diagnostics Log - - - - - - - -

This logfile identifies the version level of the various Wireless
network card components and systems settings of your computer.
Please include this log file with every support request to your
Wireless Technical Support Representative.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


Date: 2003/12/02 19:35:10

OS: Windows NT Version 5.00.2195  Service Pack 4

Variant 1, Version 2.92 of Client Manager
Variant 2, Version 7.62 of NDIS 5 Miniport driver
Variant 4, Version 5.00 of Embedded Card
      TOSHIBA Gold Card
      Enhanced WEP encryption allowed
      IEEE high-speed data rates
      03UT30506480
      IO base:DFC0
      IRQ number:11
Variant 1, Version 4.04 of Primary Functions firmware
Variant 2, Version 8.58 of Station Functions firmware

Diagnose OK

Radio link Ok but unable to retrieve AP name.

- - - - - - - - - - - - - - End of File - - - - - - - - - - - - - -
0
 
LVL 18

Expert Comment

by:JConchie
ID: 9863188
"Radio link Ok but unable to retrieve AP name."

means that the card is connecting to the router, but that the router is not configured with an access point name............
0
 
LVL 18

Accepted Solution

by:
JConchie earned 150 total points
ID: 10044555
Answered.
0
 
LVL 18

Expert Comment

by:JConchie
ID: 11153124
Please explain your "C" grade.  Here is the EE guidelines on grading. Please note the lines about asking for clarification if you need further help/assistance.

"Although we use an A-D scale here at Experts Exchange, it works differently than, say, school grades. If one or more Experts' proposals are accepted as answers, they should usually be given an A or B grade, since they have taken the time to provide you with a working solution. If a possible solution is incomplete - ask for clarification or details before accepting the answer and grading it. People should not be given lower grades because of incorrect grammar or because you just accepted their answer or comment to close the question. Keep in mind, your question and any follow-up comments should be focused so that there can be a specific answer. The following is a good guideline to follow when grading:

A: The Expert(s) either provided you with a thorough answer or they provided you with a link to information that thoroughly answered your question. An "A" can also be given to any answer that you found informative or enlightening beyond the direct question that you asked.

B: The Expert(s) provided an acceptable solution, or a link to an acceptable solution, that you were able to use, although you may have needed a bit more information to complete the task.

C: Because Experts' reliability are often judged by their grading records, many Experts would like the opportunity to clarify if you have questions about their solutions. If you have given the Expert(s) ample time to respond to your clarification posts and you have responded to each of their posts providing requested information; or if the answers, after clarification, lack finality or do not completely address the issue presented, then a "C" grade is an option. You also have the option here of just asking Community Support to delete the question.

Remember, the Expert helping you today is probably going to be helping you next time you post a question. Give them a fair chance to earn an 'Excellent!' grade and they'll provide you with some amazing support. It's also true that a "C" is the lowest grade you can give, and the Experts know that -- so use it judiciously. "
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

NTFS file system has been developed by Microsoft that is widely used by Windows NT operating system and its advanced versions. It is the mostly used over FAT file system as it provides superior features like reliability, security, storage, efficienc…
This Micro Tutorial will teach you how to censor certain areas of your screen. The example in this video will show a little boy's face being blurred. This will be demonstrated using Adobe Premiere Pro CS6.

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question