Siemen TC45 module and Linux.

Posted on 2003-12-03
Last Modified: 2013-12-09
I'm using a Siemens TC45 Wireless Module and i'm not sure if i'm doing the things well. For the moment i'm trying to make work a silly java program (something like a more ellaborated "hello world") inside the module. The point is that i launch the program with the at^sjra command through the minicom program on linux and i receive the OK response. But, taking into account that the System.out is the serial interface, I don't receive none of the println i have in my code.

So the question is: How i know if my program is working?.

Remember that i'm using linux. I have solved the problem of transferring the jar file but i can't use the emulator. By the way, should the jar file with the program be in any special localtion inside the filesystem (Java/jam/... etc) or can i put in in any accesible location?

Any help with this extremely newbie questuin is welcome. Thanks
Question by:juanpecq
  • 4

Accepted Solution

SimonTay earned 70 total points
ID: 9971211
The ASC0 output is system.out and will operate at the rate defined by the DTE.  If you open application serial ports, then this goes out on ASC1 (the second serial port).

You can download a program at or  Both these programs also have JAD files, so you can use them for OTAP testing, and both output some messages to the system.out port as well as ASC1.

We also have a TC45 Terminal product (with RS232 interfaces etc), the MTC45T.  We sell an SDK for the TC45 for GBP349 using the terminal.  It's not on the website yet, but you can get more information from


Expert Comment

ID: 10044927
Just came back to this, the application can be in any directory you like, but you have to put the whole path in the AT^SJRA commands.


ST^SJRA=A:/helloworld.jar should work if the app is in the root directory.  You need the A:/ bit.

Has this helped?


Expert Comment

ID: 10250928 for others who may be interested in the TC45.

Expert Comment

ID: 10767087
Did any of this help?

Expert Comment

ID: 14880706
I have a similar state. After running application modul answer OK
but aplication does not run. The problem was I have not
used a "preverify" to builded jar.

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

MAC Filtering: MAC filtering is like handing a list of names to a doorman. If someone comes to the door and mentions a name, this name is checked by the doorman on his list and granted or denied access by this. This means that if someone menti…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now