Solved

Open VPN connection and LAN connection simultaneously

Posted on 2003-12-04
3
277 Views
Last Modified: 2010-04-12
I'm connected to a LAN using Ethernet connection. When I open a VPN connection by using Nortel Contivity Client I do establish the VNP but I can keep my LAN connection. It seems like all my network traffic is enrouted through my VPN connection.

Any idea to configure my Nortel Client?

Thank you in advance.
0
Comment
Question by:ea4afa
3 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 50 total points
ID: 9877209
This is one of the 'features' of many VPN Clients - including Nortel Contivity - where that function is controlled by the corporate end. It is a security risk to allow you simultaneous access to your home/other network and the corporate network at the same time.
There is no way for you to get around it by adjusting the client on your end.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
VPN 101 - how and which protocol? 9 111
Windows 10 VPN? 6 87
SSIS with VPN COnnection 2 77
Internet Connection -- PING testing ? 1 29
I've had to do a bit of research to setup my VPN connection so that Clients can access Windows Server 2008 network shares.  I have a Cisco ASA 5510 firewall.  I found an article which was extremely useful: It had a solution if you use ASDM to config…
Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question