Solved

yet another easy vlan question

Posted on 2003-12-06
2
324 Views
Last Modified: 2010-04-11
currently i have a 2900xl switch running on vlan 1. i want to add a clouple of vlan's(and include a router) but not sure if i have to put the one (0/1)interface connected to my pix firewall on it's own vlan?
0
Comment
Question by:lennyk325
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Accepted Solution

by:
mikesparker earned 125 total points
ID: 9890947
Yes, I would reccomend a VLAN between your PIX and your core router/layer 3 switch. I'm not sure how your setup though so it's hard to give more detail. We use a PIX 515E and a C6513 with Sup2/MSFC2 for our internal core layer 3 switch. I am definitely planning on implementing a VLAN between the 2 devices.
0
 

Author Comment

by:lennyk325
ID: 9890957
thanks i was thinking how to setup my home network with the equiptment i have.
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

738 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question