Solved

Checkpoint express, installing the secure platform on a HP DL320

Posted on 2003-12-07
8
407 Views
Last Modified: 2013-11-16
I am trying to install the secure platform on a HP DL320, after the reboot the IDE Raid drives are not mirrored any more, and I cannot see the network card from the OS.

How do you stop the install script and change the HD drivers and the network drivers.

Barry
0
Comment
Question by:BBourdage
8 Comments
 
LVL 4

Expert Comment

by:ferg-o
ID: 9894147

Problem with SecurePlatform is that it may not support your hardware. If you start messing about with it then you will find that it is not supported. It is a stripped down version of linux so doesn't have all the driver support that you would get in a full distribution.

I know this isn't the answer you were looking for but I would speak to Checkpoint support and see what they would suggest for that model of Proliant.
0
 

Author Comment

by:BBourdage
ID: 9894169
Thank you, I have found some items on web, but nothing in detail. I hope someone out there has done this before.
Barry
0
 
LVL 6

Expert Comment

by:tatw
ID: 9897255
Have you try to install the secure platform with the help of SMARTSTART CD rom or not?
I think if you just put in the secure platform CD and boot it up, the RAID driver may not be loaded.
So try to install with SMARTSTART CD.
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:BBourdage
ID: 9897280
I have tried that direction, the problem is that the os, is a package install, it uses it's own internal drivers.

0
 
LVL 6

Expert Comment

by:tatw
ID: 9897677
If you've tried that direction, may be try to disable the raid one configuration in order to complete the installation.
Well, this is only a suggestion, not solution to your scenario.
0
 

Author Comment

by:BBourdage
ID: 9897839
I have now talked to Checkpoint. They have said that it is a hardened system, and that you cannot change the install scripts. They have recommend downloading the R55, patch. I am doing that now.

0
 
LVL 23

Expert Comment

by:Tim Holman
ID: 11468656
No comment has been added to this question in more than 21 days, so it is now classified as abandoned..
I will leave the following recommendation for this question in the Cleanup topic area:

--> PAQ - Refund

Any objections should be posted here in the next 4 days. After that time, the question will be closed.

tim_holman
EE Cleanup Volunteer
0
 

Accepted Solution

by:
modulo earned 0 total points
ID: 11501126
PAQed, with points refunded (500)

modulo
Community Support Moderator
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
CLOUD SECURITY 3 77
DHCP lease issue ? 8 94
Remote Desktop Encryption error at the client 1 44
Need assistance with Windows Firewall rules 6 31
To setup a SonicWALL for policy based routing to be used with the Websense Content Gateway there are several steps that need to be completed. Below is a rough guide for accomplishing this. One thing of note is this guide is intended to assist in the…
The DROP (Spamhaus Don't Route Or Peer List) is a small list of IP address ranges that have been stolen or hijacked from their rightful owners. The DROP list is not a DNS based list.  It is designed to be downloaded as a file, with primary intention…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
This video shows how to use Hyena, from SystemTools Software, to bulk import 100 user accounts from an external text file. View in 1080p for best video quality.

785 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question