Solved

secondary DNS server question...

Posted on 2003-12-09
1
338 Views
Last Modified: 2010-04-11
Ok, so here's the problem...   I have one server running windows 2000 server that hosts about 80 domains' DNS info as primary dns server.  I have another server in a different location that hosts all those domains as secondary dns server.  At the time, I manualy added secondary dns server info for each domain, one by one, because they were added gradually.  Now I have a third server that will act as a 3rd dns server, hence it needs to have same exact info as secondary dns server.

I would like to find a way to be able to add all these domains to the 3rd server, without having to go one by one, and typing the domain name, and setting the ip of primary dns server...

I tried to copy the dns folder from the second server to the third, but this doesnt show up under DNS, the only way I see to do this is having to go one by one...

is there any faster way to do this?

thanks!
0
Comment
Question by:teinsa
1 Comment
 
LVL 4

Accepted Solution

by:
Jivko earned 300 total points
Comment Utility
There are couple of ways:

DNSdump script:
http://www.jsiinc.com/SUBL/tip5600/rh5695.htm

Microsoft way:
http://support.microsoft.com/?kbid=280061

Regards
0

Featured Post

6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
Screen Recorder Recommendations 10 52
Route Summarization 2 28
Cisco iWAN 8 44
static routing issue no access to public internet 7 15
BIND is the most widely used Name Server. A Name Server is the one that translates a site name to it's IP address. There is a new bug in BIND (https://kb.isc.org/article/AA-01272), affecting all versions of BIND 9 from BIND 9.1.0 (inclusive) thro…
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

6 Experts available now in Live!

Get 1:1 Help Now