Solved

Setting up W2K DC behind NAT with Dymanic IP address

Posted on 2003-12-10
4
195 Views
Last Modified: 2010-03-19
How do I setup a Window2K DC behind NAT (can it's be happen).
I have cisco 831 with 2 Ethernet interface 0 and 1, Windows2K Server, and couple client pcs.
My Connection is Broadband(cable) with dymanic ip.
even I got dymanic ip, but my WAN IP is hardly change (I have the same IP address for 3 month abd it's haven't change yet). I don't mind to check my WAN ip to get into my network.
My reason doing this is so I can have a full control of my network, and maybe setting up a webserver in the furture.
Thankssss!!!
Kevin
0
Comment
Question by:kevindao
4 Comments
 
LVL 18

Accepted Solution

by:
chicagoan earned 250 total points
ID: 9918562
Inside:
In a small AD environment, I would turn off DHCP on the router.
Set your DC up with a static address on the same subnet as the router.
Use the router as the default gateway and DNS server.
You can either use DHCP on your DC or set your stations up with static addresses.
Use the router as the default gateway and the DC a the DNS server.

outside access:


Obtain a host name from http://www.dyndns.org/services/dyndns/ (free)

Install one of the clients to keep your DNS entry in sync with your dynamic WAN address http://www.dyndns.org/services/dyndns/clients.html

Now you have to determine what services you want to access from the outside, and whether these will be public or private.

Your router can port forward requests for common services from the outside address to your server with a couple of mouse clicks. You have to be aware of the security implications of these decisions.

If your access is to be private, you want to make use of the VPN capabilities of the router.

What services do you want to make available outside of your network and to whom?



0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now