Solved

I cant get to the Internet (win98)

Posted on 2003-12-11
3
458 Views
Last Modified: 2010-03-19
Hi all experts!

I have installed a D-link dfe-690txd fastethernet card on my laptop Compaq Armada e700, but I cant get to the internet.

Previously it was using modem to connect to theinternet and it worked fine, but when I want to connect through LAN I cant get online.

what can be wrong?
0
Comment
Question by:oneyg
3 Comments
 
LVL 49

Accepted Solution

by:
sunray_2003 earned 25 total points
ID: 9919795
Go to device manager . Right-click on the ethernet card.go to properties and check to see if
the hardware runs fine

Have you done the LAN connection correctly ? check to see if you static IP (if yes, manually configure it correctly)

Go to control panel --> network connections --> LAN connection . Right-click it .go to properties.
enable tcp/ip . go to properties and check IP address

Are you connecting via a router ? If yes, try directly connecting from the LAN port (on wall) or from modem ..

Sunray
0
 

Expert Comment

by:asgarali
ID: 9919823
hi

chk the following

1.  ethernet card installed and configured properly
2.  TCP/IP  settings of the ethernet Card   like ip address- subnetmassk-gateway ip  
3.  if u r using a proxy server specifyy iin the browser -options-connections-lan settinngs

check by piinnging tto the router  from ur pc and some site see iif it resolves if not recheck ur config


hope u shuld bee onlinne after this
stack
0
 
LVL 1

Author Comment

by:oneyg
ID: 9934208
I tried all that, still cant go to the internet. Can there be something wrong with my laptop? or is this totally software?
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco WAP POE power 28 119
Import AD groups from one domain to another 9 33
Simultaneous work of Wi-Fi and LAN on Win10 laptop 4 58
ip igmp join-group 8 39
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question