Setting up 2 SATA drives

I have installed a Western Digital 74GB Raptor as my main disk drive.  It is SATA and is set as the master drive.  I am trying now to install a second SATA drive to be used strictly for storage.  I set it as the master on that channel.  When I turn on the computer, it works fine, however an error message comes up that says: "The drivers for this device are not installed. (Code 28)
To reinstall the drivers for this device, click Reinstall Driver."

I did not have to install drivers for the first drive and I cannot find any drivers anywhere to install on this second drive.  I think that I may have set the jumper wrong on the second drive.  Does anyone know how to set these drives up properly?  
blackice2600aphAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

_Commented:
If they are on the same channel, one needs to be a slave.
0
SnowguyCommented:
SATA drive's don't have master slave jumpers.
You can only run one drive per sata channel so I am confused here.
0
SnowguyCommented:
What mother board are you using? Or is this on a pci SATA controller?
0
Ultimate Tool Kit for Technology Solution Provider

Broken down into practical pointers and step-by-step instructions, the IT Service Excellence Tool Kit delivers expert advice for technology solution providers. Get your free copy now.

blackice2600aphAuthor Commented:
I am using the Asus P4C800E.  Are you saying that I don't need to use jumpers at all?
0
SnowguyCommented:
>>>"Are you saying that I don't need to use jumpers at all?" Yes
SATA drives do not have jumpers for master/slave.
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=958&p_created=1050530240
If you changed the defalt maby it is trying to install a driver for power management don't know for sure.
Adding a drive should not require a driver. Unless you have configured it for use with raid and have not installed the raid driver if your MB supports this.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
_Commented:
< listening >
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Storage

From novice to tech pro — start learning today.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.