Solved

Filesystem corrupt

Posted on 2004-03-21
14
283 Views
Last Modified: 2013-12-15
Hi,

/var Filesystem gving "could this be a zero-length parition?", tried fsck and e2fsck but no luck,

any help
0
Comment
Question by:arvind
  • 5
  • 3
  • 3
  • +2
14 Comments
 
LVL 7

Expert Comment

by:troopern
ID: 10647594
Looks like  your partition table could be f****d up :/

Can you access the disk with fdisk or cfdisk and check the partition status ?

I guess that a cable might have slipped out from the disk too, but that's not that probable.
0
 
LVL 5

Author Comment

by:arvind
ID: 10648038
root and /home, /boot are accessable
0
 
LVL 7

Expert Comment

by:troopern
ID: 10648043
And all partitions are on the same disk ?

Can you read the partition table in cfdisk/fdisk ?
0
Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

 
LVL 5

Author Comment

by:arvind
ID: 10648054
all the part in same disk and I'm able to read all the partition
0
 
LVL 9

Expert Comment

by:gtkfreak
ID: 10651321
Try to start up Linux from the Linux CDs and check if u r able to see the /var partition being listed.
0
 
LVL 12

Expert Comment

by:paullamhkg
ID: 10654626
Why not just boot into single user mode, ie. at the boot prompt type "linux S" and run the e2fsck /var (or the /dev/hda# <-- the partition # of the var) to check the file system and let the e2fsck to fix your problem.
0
 
LVL 5

Author Comment

by:arvind
ID: 10655278
Tried All the metod -- I think HDD totaly gone

Need to replace HDD and new installtion ;) is Maxter HDD supoorted by Redhat?
0
 
LVL 7

Expert Comment

by:troopern
ID: 10656096
All IDE hdd's are supported by Linux. As far as I know.
I haven't heard of any unsupported hdd's.
0
 
LVL 5

Author Comment

by:arvind
ID: 10656099
but now kernal showing penic -- means HDD totay gone
0
 
LVL 12

Expert Comment

by:paullamhkg
ID: 10663592
kernal panic don't mean the HDD gone, you can try using the free diagnostic utility from the vendor of your disk to check for problems with the disk. www.maxtor.com 
0
 
LVL 12

Expert Comment

by:paullamhkg
ID: 10663599
0
 
LVL 5

Author Comment

by:arvind
ID: 10876997
tried but no luck, Now Not able to boot from HDD,
So chnaged my HDD to Segate :)
0
 

Accepted Solution

by:
modulo earned 0 total points
ID: 10911475
Closed, 125 points refunded.
modulo
Community Support Moderator
Experts Exchange
0

Featured Post

Use Case: Protecting a Hybrid Cloud Infrastructure

Microsoft Azure is rapidly becoming the norm in dynamic IT environments. This document describes the challenges that organizations face when protecting data in a hybrid cloud IT environment and presents a use case to demonstrate how Acronis Backup protects all data.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is the error message I got (CODE) Error caused by incompatible libmp3lame 3.98-2 with ffmpeg I've googled this error message and found out sometimes it attaches this note "can be treated with downgrade libmp3lame to version 3.97 or 3.98" …
rdate is a Linux command and the network time protocol for immediate date and time setup from another machine. The clocks are synchronized by entering rdate with the -s switch (command without switch just checks the time but does not set anything). …
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question