I have a DHCP server with the following infomation:
Range: 184.108.40.206 to 255
It is currently full and I have been given another range: 220.127.116.11 to 18.104.22.168 with subnet mask 255.255.255.224. It has the same router address: 22.214.171.124. The first one is currently full and I assumed that it would fall over to the second one which is not happening. Someone please give me some advise to what i am doing wrong.
1. Stop using public IP's and use Network Address Translation at the firewall, and use private IP's that give you the ability to use all the addresses you want in the private address spaces of
If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg).
If you're looking for how to monitor bandwidth using netflow or packet s…