ealwali
asked on
Cisco IOS
I have never loaded an ios into a new router
Plesae give me the steps involved
I have a 1760 cisco router
Urgent
pl;iz
Plesae give me the steps involved
I have a 1760 cisco router
Urgent
pl;iz
ASKER
Whre do i download image... I also dont have a CCO username.. Please give me one i can use .... then tell me how to setup tftp
Sorry, I cannot give you the image. If you don't have a CCO account, you will have to buy the IOS image software. Try http://www.cdw.com
You can purchase a CD with the IOS image and a new license
Else, you can purchase a SmarNet maintenance contract that only covers the IOS for about $100
You can purchase a CD with the IOS image and a new license
Else, you can purchase a SmarNet maintenance contract that only covers the IOS for about $100
ASKER
Thanks But now .. then just give me the STEPS of installing... I have ordered my finance guy to purchase an IOS....
Please help with the stepps
Please help with the stepps
ASKER
By the way ... i have a 2600 router with two serial interface... is it possible to add a third one......
I only slot for NM module..... my boss says he has bought another serial card...
what do I do now
thanks...
I only slot for NM module..... my boss says he has bought another serial card...
what do I do now
thanks...
Step-by-step procedures are here if you just follow the link
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_tech_note09186a00801fc986.shtml
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_tech_note09186a00801fc986.shtml
A 2600 router comes with only two serial WIC slots.
The modular nature of the 2600 gives you many options to have multiple serial interfaces.
You can purchase a NM-2W module that will give you two more WIC slots, for a potential to accept up to 4 Wan Interface Cards (WIC-x)
If you just need serial connections, you can get a single WIC that has 2 serial ports on it...
The modular nature of the 2600 gives you many options to have multiple serial interfaces.
You can purchase a NM-2W module that will give you two more WIC slots, for a potential to accept up to 4 Wan Interface Cards (WIC-x)
If you just need serial connections, you can get a single WIC that has 2 serial ports on it...
ASKER
That means that if I buy the NM-2W module I can add and have two more slots .. thanks
If I buy a single WIC ... will it fit in the NM slots.. (it looks so wide)
Thanks ... mMMMwwaa
pliz reply
If I buy a single WIC ... will it fit in the NM slots.. (it looks so wide)
Thanks ... mMMMwwaa
pliz reply
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thanks SIR
my only problem will be to get the IOS and
do the job
thanks
again
my only problem will be to get the IOS and
do the job
thanks
again
ASKER
What commands can I use to configure
ISDN
Thanks .... i have so many questions
ISDN
Thanks .... i have so many questions
In an effort to keep each thread a separate problem/solution set, we ask that you post new questions for a different question.
Don't forget to close out this one by accepting a comment.
Don't forget to close out this one by accepting a comment.
Do you have the IOS image? Is it on CD, or just on a PC?
Do you have a TFTP server set up?
Detailed procedure
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_tech_note09186a00801fc986.shtml