Solved

Trying to get my netgear dsl modem to work with my PS2.

Posted on 2004-03-28
4
385 Views
Last Modified: 2013-12-14
I am not sure what I am doing wrong.  I am living in Germany sationed here, and I have a dsl line th rough my local phone company TKS.  They are the ones that i have my phone and dsl line through.  I use AOL to connect to the internet her on my PC.  The only password that is required of me to connect to the internet is my AOL.   When connecting to my PS2, what do i put for type of connection Auto Config?  Then do I select aol for my ISP?  If this is correct I have treid this and it comes up with an error.  Any  help or info would be nice.  thanks.
0
Comment
Question by:downtwn
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
4 Comments
 

Author Comment

by:downtwn
ID: 10697987
?
0
 

Assisted Solution

by:bmsilk
bmsilk earned 100 total points
ID: 10700317
Sounds like you are using TKS as a connection to the Internet and "piggy-backing" AOL to provide your content.  With your PS2, you would want to use TKS as your ISP as the PS2 is provided the Internet connection via your DSL modem (TKS.)  AOL is only serving content to your computer, NOT the connection.  
I assume that you are using a Netgear router, in this case, set the PS2 to get its' settings automaticaly.  If there are any problems connecting to the gaming service, etc, you may need to place the PS2 into the DMZ, which is a fancy way of saying that the PS2 is not protected by the firewall on the Netgear, nothing to worry about with a PS2.  For DMZ config. refer to your manual or to Netgear itself.
0
 
LVL 6

Accepted Solution

by:
HippyWarlock earned 100 total points
ID: 10749583
The specific error message would help.

Help on your T-DSL line (English not guranteed but your Deutsche should be ok by now:
(0800) 33 04433.


You can manually install the T-DSL adaptor and protocol drivers. First you¹ll have to get the drivers. For some reason, Telekom doesn¹t offer these drivers for Windows separately for download. You¹ll find them on the T-Online CD (March 2001 or later). The drivers are found under <CD>:\Adsl\Treiber\PC\win9x (or for Windows 2000 F:\Adsl\Treiber\PC\W2000).
From within your Networking Properties control panel you¹re going to add a new protocol. When prompted chose ³Have DiskŠ² and browse to the folder above. Then choose the file called ³TDSLProt.inf². This will install the T-DSL Protocol. The T-DSL Adaptor should get installed automatically at the same time. If not, then follow the same procedure to add the adaptor driver but this time select the file called ³TDSLAdap.inf². Once both the adaptor and protocol are installed, you¹ll have to reboot.

Are there any OS2 specific drivers on the CD?
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This solves the problem of diagnosing why an internet connection is no longer working. It also helps identify the likely cause of the lost connection if the procedure fails to re-establish your internet connection. It helps to pinpoint the likely co…
Sometimes you have to pull out old tricks to get a new firewall to work… While we were installing a new Sonicwall at a customers site we found that sites they were able to visit before were not working.  It seemed random and we could not understa…
Nobody understands Phishing better than an anti-spam company. That’s why we are providing Phishing Awareness Training to our customers. According to a report by Verizon, only 3% of targeted users report malicious emails to management. With compan…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question