?
Solved

Name Server with IP only

Posted on 2004-03-28
1
Medium Priority
?
198 Views
Last Modified: 2012-05-04
I've just apply a domain name from bulkregister and I want to setup a name server to handle the DNS for the domain.

However, when I change the name server of the domain name, it only accept the host name of the name server and IP address is not allowed.

Since our name server doesn't have the DNS record from outside DNS server, how can I map the domain name for the name server?

Please help.

Thanks in advance.
0
Comment
Question by:ahfai
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 6

Accepted Solution

by:
Pascal666 earned 500 total points
ID: 10701678
You need to register your nameservers through the BulkRegister interface before you can assign them to your domain.

-Pascal
0

Featured Post

Get your Conversational Ransomware Defense e‑book

This e-book gives you an insight into the ransomware threat and reviews the fundamentals of top-notch ransomware preparedness and recovery. To help you protect yourself and your organization. The initial infection may be inevitable, so the best protection is to be fully prepared.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question