hexfusion
asked on
Route Command Problems WIN2K Server
Ok I have the following setup
Router 1
eth0 192.229.13.78
eth1 192.229.23.33
subnet 255.255.255.224
eth1:1 192.229.23.65
subnet 255.255.255.224
My windows server has 1 nic and I am trying to have IP's from both pools work for the server. If you look at the routing table below my IP's in the new pool have the wrong gateway. All the IP's share the same netmask which should be 255.255.255.224.
IP's .53-.58 need to connect to gateway 192.229.23.33 and subnet 255.255.255.224
IP's .66-.75 must connect gateway 192.229.23.65 and subnet 255.255.255.224
I cannot get ROUTE change to work for me how can I adjust the following table to my specs using route change
I can't bother the IP's .53-.58 as they are in use.
Thanks in advance for your time and consideration
==========================
Interface List
0x1 ..........................
0x1000003 ...00 60 08 5a 3b 71 ...... 3Com 3C90x Ethernet Adapter
==========================
==========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 24.229.23.33 24.229.23.53 1
24.229.23.32 255.255.255.224 24.229.23.53 24.229.23.53 1
24.229.23.53 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.54 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.55 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.56 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.57 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.58 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.64 255.255.255.224 24.229.23.66 24.229.23.53 1
24.229.23.66 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.67 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.68 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.69 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.70 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.71 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.72 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.73 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.74 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.75 255.255.255.255 127.0.0.1 127.0.0.1 1
24.255.255.255 255.255.255.255 24.229.23.53 24.229.23.53 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 224.0.0.0 24.229.23.53 24.229.23.53 1
255.255.255.255 255.255.255.255 24.229.23.53 24.229.23.53 1
Default Gateway: 24.229.23.33
==========================
Persistent Routes: NONE
Router 1
eth0 192.229.13.78
eth1 192.229.23.33
subnet 255.255.255.224
eth1:1 192.229.23.65
subnet 255.255.255.224
My windows server has 1 nic and I am trying to have IP's from both pools work for the server. If you look at the routing table below my IP's in the new pool have the wrong gateway. All the IP's share the same netmask which should be 255.255.255.224.
IP's .53-.58 need to connect to gateway 192.229.23.33 and subnet 255.255.255.224
IP's .66-.75 must connect gateway 192.229.23.65 and subnet 255.255.255.224
I cannot get ROUTE change to work for me how can I adjust the following table to my specs using route change
I can't bother the IP's .53-.58 as they are in use.
Thanks in advance for your time and consideration
==========================
Interface List
0x1 ..........................
0x1000003 ...00 60 08 5a 3b 71 ...... 3Com 3C90x Ethernet Adapter
==========================
==========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 24.229.23.33 24.229.23.53 1
24.229.23.32 255.255.255.224 24.229.23.53 24.229.23.53 1
24.229.23.53 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.54 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.55 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.56 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.57 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.58 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.64 255.255.255.224 24.229.23.66 24.229.23.53 1
24.229.23.66 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.67 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.68 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.69 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.70 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.71 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.72 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.73 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.74 255.255.255.255 127.0.0.1 127.0.0.1 1
24.229.23.75 255.255.255.255 127.0.0.1 127.0.0.1 1
24.255.255.255 255.255.255.255 24.229.23.53 24.229.23.53 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 224.0.0.0 24.229.23.53 24.229.23.53 1
255.255.255.255 255.255.255.255 24.229.23.53 24.229.23.53 1
Default Gateway: 24.229.23.33
==========================
Persistent Routes: NONE
Last Comment
ASKER CERTIFIED SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
Windows 2000
Windows 2000 is an operating system for use on both client and server computers. It is the successor to Windows NT 4.0, and is the last version of Microsoft Windows to display the "Windows NT" designation. Four editions of Windows 2000 were released (Professional, Server, Advanced Server, and Datacenter Server) that shared a core set of features, including many system utilities such as the Microsoft Management Console. All versions of the operating system support NTFS 3.0, Encrypting File System, as well as basic and dynamic disk storage. The Windows 2000 Server family includes support for Active Directory services, Distributed File System and fault-redundant storage volumes.
37K
Questions
--
Followers
--
Top Experts
Get a personalized solution from industry experts
TRUSTED BY
ASKER