Solved

How to run SNMP service?

Posted on 2004-03-31
8
429 Views
Last Modified: 2010-03-18
First off I am a Linux beginner.  How do I set up to run SNMP as a service when my computer starts up.  Also how do I manually start the SNMP service?
0
Comment
Question by:aedean
  • 3
  • 2
8 Comments
 
LVL 14

Expert Comment

by:pablouruguay
ID: 10725994
go to this page.....

http://linuxvm.com/SNMPIN.html
0
 
LVL 14

Expert Comment

by:pablouruguay
ID: 10726046
other in /etc/snmpd.conf

you can modify your configuration...

for the second question abaout start and stop snmp manually

if you use redhat  put this

service snmpd stop/start

o sino

/etc/init.d/snmpd start/stop
0
 

Author Comment

by:aedean
ID: 10726258
I am using RedHat.
0
Master Your Team's Linux and Cloud Stack!

The average business loses $13.5M per year to ineffective training (per 1,000 employees). Keep ahead of the competition and combine in-person quality with online cost and flexibility by training with Linux Academy.

 

Author Comment

by:aedean
ID: 10726263
I want to be able to use GUI as much as possible.
0
 
LVL 14

Accepted Solution

by:
pablouruguay earned 500 total points
ID: 10727322
in here you have many applets GUI for configuring and manage

http://linas.org/linux/NMS.html

and check these but i never tested

http://resource.intel.com/telecom/support/releases/linux/SR60cpci/Onldoc/htmlfiles/iptcfggd/pmaccfg6.htm

0
 

Expert Comment

by:givetoprakash
ID: 10731310
For redhat linux 9.0

          you do this things to run snmp agent deamon

give the command at prompt

/etc/rc.d/init.d/snmpd start  -> start

/etc/rc.d/init.d/snmpd stop   -> stop

/etc/rc.d/init.d/snmpd retstart -> restarting

you can configure it using the file
      /etc/snmp/snmpd.conf

for automatically starting snmp agent server ,
   cd /etc/rc.d/rc3.d
   ln -s ../init.d/snmpd S100snmpd
   cd /etc/rc.d/rc5.d
   ln -s ../init.d/snmpd S100snmpd





0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen several blogs and forum entries elsewhere state that because NTFS volumes do not support linux ownership or permissions, they cannot be used for anonymous ftp upload through the vsftpd program.   IT can be done and here's how to get i…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question