Solved

Usb 2.0 drivers

Posted on 2004-04-01
6
20,118 Views
Last Modified: 2010-05-18
I have an Asus P4P800 motherboard running on Windows XP Pro with service pak 1 installed. I have the yellow exclamation mark beside Intel 82801EB USB2 Enhanced Host Controller 24DD in the device manager. I can not find a Microsoft Digitally signed driver to enable the USB 2.0.
0
Comment
Question by:Mitch09
  • 4
  • 2
6 Comments
 
LVL 22

Expert Comment

by:Christopher McKay
ID: 10735125
Hi Mitch09
Try here:
http://www.asus.com.tw/support/download/item.aspx?ModelName=P4P800
Hope this helps!

:o)

Bartender_1
0
 
LVL 22

Expert Comment

by:Christopher McKay
ID: 10735147
Mitch09,
The drivers for Win2K should work for you.
(You will have to click on the "all" tab for all of the drivers for the P4P800 and then scroll to the bottom for  the drivers for Windows 20000)

:o)

Bartender_1
0
 

Author Comment

by:Mitch09
ID: 10762131
I have an Asus P4P800 motherboard running on Windows XP Pro with service pak 1 installed.I can not find a Microsoft Digitally signed driver to enable the USB 2.0. I have the yellow exclamation mark beside Intel 82801EB USB2 Enhanced Host Controller 24DD in the device manager. .

I installed the driver for windows 2000 and I still have the yellow exclamation mark beside the Intel 82801EB USB2 Enhanced Host Controller 24DD in the device manager. When I check out the driver details It informs me that I do not have a Microsoft compatible driver for C:\windows\system32\drivers\usbehci.sys. All of my other USB devices are Microsoft compatible and working fine. Any other suggestions?
0
Three Reasons Why Backup is Strategic

Backup is strategic to your business because your data is strategic to your business. Without backup, your business will fail. This white paper explains why it is vital for you to design and immediately execute a backup strategy to protect 100 percent of your data.

 
LVL 22

Expert Comment

by:Christopher McKay
ID: 10763787
After installing the drivers, did you try removing the device with the yellow exclamation mark, and then rebooting?
If so, what message did it give you whe attempting to install the drivers?

Bartender_1
0
 

Author Comment

by:Mitch09
ID: 10767492
After installing the drivers, removing the device and re-booting the found new hardware wizard appeared, the wizard searched then said the file 'usbehci.sys on (Unknown) is needed, I browse to the location of where that file is. I then get the hardware instalation window saying Intel 82801EB USB2 enhanced Host Controller 24DD has not passed windows Logo testing etc.... I continue anyways. It re-asks for the same file again. I locate it once more and select ok. Then I get the cannot start this hardware dialog warning box saying windows cannot initialize the device driver for this hardware (code 37), I then select finish. I still have the yellow exclamation mark.
0
 
LVL 22

Accepted Solution

by:
Christopher McKay earned 20 total points
ID: 10768457
Hmmmm... ok, Have you tried downloading and installing this:
http://www.microsoft.com/downloads/details.aspx?amp;amp;displaylang=en&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86&displaylang=en

The above is a patch for USB difficulties. Perhaps these difficulties are contributing to your problem.

:o)

Bartender_1
0

Featured Post

Use Case: Protecting a Hybrid Cloud Infrastructure

Microsoft Azure is rapidly becoming the norm in dynamic IT environments. This document describes the challenges that organizations face when protecting data in a hybrid cloud IT environment and presents a use case to demonstrate how Acronis Backup protects all data.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Can I legally transfer my OEM version of Windows to another PC?  (AKA - Can I put a new systemboard in my OEM PC?) Few of us are both IT and legal experts but we all have our own views of Microsoft's licensing rules and how they apply.  There are…
We have adopted the strategy to use Computers in Student Labs as the bulletin boards. The same target can be achieved by using a Login Notice feature in Group policy but it’s not as attractive as graphical wallpapers with message which grabs the att…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question