Solved

PIX with 6 interfaces problem

Posted on 2004-04-02
1
294 Views
Last Modified: 2013-11-16
Hi i have a PIX 515 E Unrestricted with 6 Interfaces. This is the network diagram:

                                   OUTSIDE (connected to an HDSL Router)
                                           |
                                         PIX --DMZ1
                                         PIX --DMZ2 --ADSL Gateway with a public IP
                                           |
                                         LAN (192.168..x.0)

well as you can see i have list only 2 interfaces of the six i have...
on the PIX i have setted as default gateway the ip of the HDSL router connected on the Outside.
The question is how can i use the ADSL gateway from the LAN?
i'll explain better:
i'd like to use the HDSL placed on the OUTSIDE only for MAil services on the DMZ1 ..IMAP,SMTP, and the ADSL placed on the DMZ2 for Internet browsing of the client on the LAN.....HTTP,FTP...etc
is possible to do that?
Thank you

0
Comment
Question by:acivita
1 Comment
 
LVL 11

Accepted Solution

by:
billwharton earned 400 total points
ID: 10740945
No, it's not possible to use the PIX to route to the Internet via two interfaces.

You would only be able to place one default gateway command like this:
route outside 0 0 <gateway ip> OR
route dmz2 0 0 <gateway ip>

If you have two ADSL routers and want to load balance, you would need to use a router to which both the ADSL modems connect to and the PIX would connect to this router. Check this doc:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_qanda_item09186a0080094874.shtml#Q18

0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Setup NAT/PAT question 3 49
Switch ports not working 8 35
Voicemail on Cisco Unity Express unit has quit working 6 28
ASA 5505 not passing traffic to Netgear router 22 32
I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question