Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

network lost

Posted on 2004-04-03
1
307 Views
Last Modified: 2013-11-15
 When I start my computer it can connect to my local area network after 1-3  hours it can not connect to my local area net work if I restart the computer it will connect a gain it come from soft ware or hardware problem
Thank
0
Comment
Question by:teera
1 Comment
 
LVL 67

Accepted Solution

by:
sirbounty earned 350 total points
ID: 10747305
Could be a failing Network adapter...
But, it could also be a setting that needs adjusting:

1. Click Start, click Run, type regedit (Windows 2000 or Windows Server 2003) or type regedt32 (Windows NT 4.0), and then click OK.
2. Locate and then click the following key in the registry:

 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters

3. In the right pane, click the autodisconnect value, and then on the Edit menu, click Modify. If the autodisconnect value does not exist, follow these steps:
4. On the Edit menu, point to New, and then click REG_DWORD.
5. Type autodisconnect, and then press ENTER.
6. Click Hexadecimal.
7. In the Value data box, type ffffffff, and then click OK.

ref: http://support.microsoft.com/?kbid=297684
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Delta outage: 650 cancelled flights, more than 1200 delayed flights, thousands of frustrated customers, tens of millions of dollars in damages – plus untold reputational damage to one of the world’s most trusted airlines. All due to a catastroph…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question