Link to home
Start Free TrialLog in
Avatar of evileyejoe
evileyejoe

asked on

HP Laserjet 4v lower cassette

In my lower cassette for the 4v one side that holds the pickup roller has broken and the roller no longer stays on that arm that lowers to pick up paper.  Is there anyway to just replace that arm or do I have to replace the whole cassette?
Avatar of mrfixitpc
mrfixitpc
Flag of United States of America image

Is the  broken part   part of the cassette  or   the main part of  printer ???  Just  want  to make sure  looking for  correct  part... Since  im  looking at the service manual...

MRFIXITPC
Is  this a   250  or  500 sheet  capacity   tray ????
Avatar of evileyejoe
evileyejoe

ASKER

It is a 500 sheet feeder C3760A.  The broken part is that arm in the cassette that comes down to pick the paper it.  the part broken is one of the little pieces of plastic that holds the pickup roller.
Yes   then i would  suggest  replacing the   tray   let me    look up on my  end  im an Authorized  HP  Laserjet Repair  person    and let em  see if  the part  is avial  thru  HP  and cost  if its alot  may   suggest a new  peinter   hold a  few  moments
ASKER CERTIFIED SOLUTION
Avatar of mrfixitpc
mrfixitpc
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Not that's pretty much what I thought. thanks