Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

NetDDE errors every 30 minutes

Posted on 2004-04-05
5
Medium Priority
?
885 Views
Last Modified: 2009-07-29
On one of my Windows 2000 Member Servers, in the System Log, I'm getting an Event ID:206 every 30 minutes.  Details are "Listen Failed:15".....This is scaring the crap out of me...Can anyone help me find out what this error means and how to resolve it?  Thanks.
0
Comment
Question by:tenover
2 Comments
 
LVL 67

Accepted Solution

by:
sirbounty earned 2000 total points
ID: 10758550
Any of these apply to your situation? http://www.eventid.net/display.asp?eventid=206&source=NetDDE
0
 

Expert Comment

by:Himlad
ID: 12017622
I have just run into this error on 2 of my W2K Servers fully patched. We had removed a network cable for labeling and reattached. The error then started to appear. The error then went away after a reboot. We installed a gigabit card on a W2K server as well and had the same error. This again went away after a reboot.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
This is the first one of a series of articles I’ll be writing to address technical issues that are always referred to as network problems. The network boundaries have changed, therefore having an understanding of how each piece in the network  puzzl…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Loops Section Overview

876 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question