• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1160
  • Last Modified:

Trouble with Wake on Lan across Multiple Subnets

I am trying to find a way to use wake on lan across multiple subnets, but it does not work.  I can use the program to wake up a computer on the same subnet, for example 10.122.32.xxx can wake up a computer with the address 10.122.32.yyy, but a computer with the ip address 10.122.32.xxx cannot wake up a computer on 10.122.31.yyy.  I am using PCNet software from AMD to do this, any ideas on the problem?
Thanks.
0
archv6625
Asked:
archv6625
1 Solution
 
Gareth GudgerCommented:
Well I am not sure if PCnet can support Wake on Lan across subnets. I couldn't find anything to support it if it does. I know Norton's Ghost 7.5 or later will Wake on Lan across subnbets.

What kind of router are you using between the subnets? I think the router has to be supporting BOOTP requests/forwarding.
0
 
archv6625Author Commented:
We use a Cisco 6500 which has a vlan table in it, each vlan being on a different subnet.  I know the 6500 is capable of using BOOTP, just don't know if we have it on.  Unfortanately I am not in the group that controls the switches...  I'll look into norton Ghost, thanks.
0

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now