Solved

configuring 2000 server as a VPN server

Posted on 2004-04-14
1
293 Views
Last Modified: 2010-04-11
I want to establish a VPN connection to a remote user.

The server at the office is running Win2K server. There are 6 local nodes on that network. The server is currently configured for file sharing. There is a Linksys switching hub connected to a DSL modem everyone including the server use this to access the internet.

The remote user is running Win2K pro, connects with DSL and needs to access the office server.

How should I set this up?
0
Comment
Question by:Newtons_Lawyer
1 Comment
 
LVL 10

Accepted Solution

by:
anupnellip earned 200 total points
ID: 10830784
the client would require to know the public Ip address of your office internet .

check this on how to setup VPN on windows 2000 server .

http://support.microsoft.com/default.aspx?scid=kb;en-us;308208
http://www.oucs.ox.ac.uk/windows/winnt/vpn/win2k.html

on your linksys router you would need to forward port 1723 to your VPN server ( ie the winows 2000 server acting as VPN serrver )
 
Check this to configure the client
http://www.mcgill.ca/ncs/access/remote/vpn/windows/windowsvpn2000/
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question