Solved

How configure ssh on a cisco catalyst 2950 and in a 3550

Posted on 2004-04-14
1
2,890 Views
Last Modified: 2008-03-04
I already have installed cripty ISO 12.1(20)EA1 with 3 DES.
Can anyone explain me how to configure the ssh.

Thanks
0
Comment
Question by:maximilianoozyilmaz
1 Comment
 
LVL 2

Accepted Solution

by:
wmilliga earned 500 total points
ID: 10832823
Max:

Here are the links. FYI, there are some caveats with regard to SSH in the release notes.


Configuration Guide:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12119ea1/2950scg/swauthen.htm


Release Notes:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12120ea1/ol503501.htm
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Powerline adapter slow Mbps? 38 171
How to change the nameserver on Ubuntu Server 6 50
Internet link load balancer 6 67
VPN Server config in Modem 5 31
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

827 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question