Solved

Gigabyte GA-7N400 Pro motherboard raid drivers?? (ITE 8212) (Extra 100pts if its fixed today)

Posted on 2004-04-15
4
2,595 Views
Last Modified: 2013-12-06
OK Like the title says this is a Gigabyte GA-7N400 Pro motherboard with the ITE 8212 raid controler
here is a link to the specs on their website.
http://www.giga-byte.com/MotherBoard/Products/Products_GA-7N400%20Pro.htm
from this page if you click drivers... they have a link to the raid drivers for mandrake / redhat / and windows
http://www.giga-byte.com/Motherboard/Support/Driver/Driver_GA-7N400%20Pro.htm

And I know they work on redhat and I assumed that it would work just as well using Fedora Core 1
(Aparently not), I'v tried installing the drivers using the steps for redhat 9.0 excpet it complains that
its not the right kernal version and modprobe fails...

How can I get my raid controller to work???

extra 100 points if it works for my other fedora install using a
http://www.giga-byte.com/MotherBoard/Products/Products_GA-7N400%20Pro2.htm motherboard

Thanks...
and remember (Extra 100pts if its fixed today)
0
Comment
Question by:EHart7
  • 2
  • 2
4 Comments
 
LVL 6

Expert Comment

by:karlwilbur
ID: 10838970
It should be just fine.  Have you tried "insmod -f (module)"? Sometimes you need to give it 'em little nudge.

Should work on both boards.  Depends on who wrote the module.

-karl
0
 

Author Comment

by:EHart7
ID: 10846067
The Module name is "iteraid.o"

And..the -f didn't work.... with out -f it just says

iteraid.o was compiled for kernel version 2.4.20-8
while this kernel is version 2.4.22-1.2115.nptl

wht the -f I get those 2 and these
iteraid.o: unresolved symbol register_chrdev_R90bf96e3
iteraid.o: unresolved symbol scsi_register_Rce79b934
iteraid.o: unresolved symbol mem_map_R4eab43ce
iteraid.o: unresolved symbol scsi_unregister_Rd7dfbd76

hummmm..............now what???
0
 
LVL 6

Accepted Solution

by:
karlwilbur earned 500 total points
ID: 10850304
You might want to try compiling a new driver against your current kernel.

Here is the driver source:
http://www.ite.com.tw/pc/LinuxSrc_it8212_092005-05.zip

Make a directory for it, download and unpack using "unzip LinuxSrc_it8212_092005-05.zip"
(Zip available here: ftp://ftp.info-zip.org/pub/infozip/src/zip23.tar.gz)

I am assuming that you are using Fedora though you did not directly say it.

So, cd into the Red Hat directory "cd RedHat"

Then "make" (you'll need to have the kgcc package installed for kernel copilations)

Now, copy "iteraid.o" to the correct modules directory (something like "/lib/modules/2.4.22/kernel/drivers/md/")

Now your "insmod" without the "-f" should work just fine.

If is does, add "iteraid.o" to your "/etc/modules" file. and your good to go.

-Karl
0
 

Author Comment

by:EHart7
ID: 10880409
worked great....


Thanks Karl....
0

Featured Post

6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

Join & Write a Comment

Introduction We as admins face situation where we need to redirect websites to another. This may be required as a part of an upgrade keeping the old URL but website should be served from new URL. This document would brief you on different ways ca…
Linux users are sometimes dumbfounded by the severe lack of documentation on a topic. Sometimes, the documentation is copious, but other times, you end up with some obscure "it varies depending on your distribution" over and over when searching for …
Learn how to navigate the file tree with the shell. Use pwd to print the current working directory: Use ls to list a directory's contents: Use cd to change to a new directory: Use wildcards instead of typing out long directory names: Use ../ to move…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now