Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Turn on solicited remote assistance on non domain controled systems.

Posted on 2004-04-15
3
518 Views
Last Modified: 2008-01-09
Is there a way to turn on the solicited remote assistance in the Group policy on machines that are not part of a domain?
I have about 1000 computers right now that do not log into the domain and I would like to make a bat file that changes a reg key or something to make it so I can offer remote assistance to these computers. But I'm totaly lost on how to do this or if its even possilbe.

Thanks
0
Comment
Question by:USBMHC
3 Comments
 
LVL 67

Accepted Solution

by:
sirbounty earned 500 total points
ID: 10837794
>>
Configure the Offer Remote Assistance Policy Setting
To configure the Offer Remote Assistance policy setting:
Start the Microsoft Management Console (MMC) Group Policy snap-in: Click Start, click Run, and then in the Open box, type: gpedit.msc. Then, click OK.
Locate the Offer Remote Assistance policy in the Local Computer Policy\Computer Configuration\Administrative Templates\System\Remote Assistance folder.
Double-click Offer Remote Assistance.
On the Offer Remote Assistance Properties dialog box, click Enable.
Select whether or not the expert users can:
View the computer of the novice user
View and control the computer of the novice user
NOTE: This setting is for the entire group that is listed. The Offer Remote Assistance policy setting does not provide a mechanism to enable one group of users to have the ability to view the computer of the novice user and a second group of users to have the ability to view and control the computer of the novice user. There can be only one group.


Click Show. The Show Contents dialog box is displayed.
Click Add to add the Domain Users and Domain User Groups.
Click OK, and then click OK to close the Show Contents dialog box and the Offer Remote Assistance Properties dialog box.
Quit the MMC Group Policy snap-in.
<<ref: http://support.microsoft.com/?kbid=301527
0

Featured Post

Networking for the Cloud Era

Join Microsoft and Riverbed for a discussion and demonstration of enhancements to SteelConnect:
-One-click orchestration and cloud connectivity in Azure environments
-Tight integration of SD-WAN and WAN optimization capabilities
-Scalability and resiliency equal to a data center

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are 2 things you must have in order to connect to the internet behind a router, The "Gateway IP" of the router, which is usually something like 192.168.xxx.1, I've seen routers with default values of: 192.168.0.1, 192.168.1.1, 192.168.11.1, …
Can you find a fax from a vendor you saved a decade ago in seconds? Have you ever cursed your PC under your breath during an audit because you couldn’t find the requested statement or driver history?  If you answered no to the first question or yes …
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question