Solved

Pinouts for connectors to cable PC as operations console for rs6000/ 43p

Posted on 2004-04-16
2
614 Views
Last Modified: 2013-12-27
I have tried the following configurations with no luck. The Risc is a 43p running aix 4.3.3.0 and the pc is running windows 2000 server. I have tried procomm, anzio, and hyperterminal as the emulator.

In this configuration I used this connector on each end with a patch cable connecting them
RJ45   to   DB9 Socket
1              4
2              8
3
4              2
5              3
6              5
7              7
8              1 & 6

In this configuration I used 2 different pinouts with a patch cable connecting them.

RJ45 to DB9 PC com port configuration

RJ45                 DB9
DCD     1 ------- 1  DCD
DSR     2 ------- 6  DSR
DTR     3 ------- 4  DTR
S/GND  4 ------- 5  S/GND
TXD     5 ------- 2  RXD
RXD     6 ------- 3  TXD
CTS     7 ------- 8  CTS
RTC     8 ------- 7  RTS

RJ45 to DB9 IBM RS6000 com port configuration

RJ45                   DB9
DSR    2 ------- 1  DCD  
RXD    6 ------- 3  TXD
TXD    5 ------- 2  RXD
S/GND 4 ------- 5  S/GND
RTS    8 ------- 7  RTS
CTS    7 ------- 8  CTS

                     Change / Show Characteristics of a TTY

Type or select values in entry fields.
Press Enter AFTER making all desired changes.

[TOP]                                                   [Entry Fields]
  TTY                                                 tty0
  TTY type                                            tty
  TTY interface                                       rs232
  Description                                         Asynchronous Terminal
  Status                                              Available
  Location                                            01-S1-00-00
  Parent adapter                                      sa0
  PORT number                                        [0]                      +
  Enable LOGIN                                        disable                 +
  BAUD rate                                          [9600]                   +
  PARITY                                             [none]                   +
  BITS per character                                 [8]                      +
  Number of STOP BITS                                [1]                      +
  TIME before advancing to next port setting         [0]                      +#
  TERMINAL type                                      [wyse50]
  FLOW CONTROL to be used                            [xon]                    +
  OPEN DISCIPLINE to be used                         [dtropen]                +
  STTY attributes for RUN time                       [hupcl,cread,brkint,icr> +
  STTY attributes for LOGIN                          [hupcl,cread,echoe,cs8]
  LOGGER name                                        []
  STATUS of device at BOOT time                      [available]              +
  REMOTE reboot ENABLE                                no                      +
  REMOTE reboot STRING                               [#@reb@#]
  TRANSMIT buffer count                              [16]                     +#
  RECEIVE trigger level                              [3]                      +#
  STREAMS modules to be pushed at OPEN time          [ldterm]                 +
  INPUT map file                                     [none]                   +
  OUTPUT map file                                    [none]                   +
  CODESET map file                                   [sbcs]                   +

  POSIX special control characters:

  INTERRUPT character                                [^c]
  QUIT character                                     [^\]
  ERASE character                                    [^h]
  KILL character                                     [^u]
  END OF FILE character                              [^d]
  END OF LINE character                              [^@]
  2nd END OF LINE character                          [^?]
  DELAY SUSPEND PROCESS character                    [^y]
  SUSPEND PROCESS character                          [^z]
  LITERAL NEXT character                             [^v]
  START character                                    [^q]
  STOP character                                     [^s]
  WORD ERASE character                               [^w]
  REPRINT LINE character                             [^r]
  DISCARD character                                  [^o]
  Apply change to DATABASE only                       no                      +


0
Comment
Question by:chrisbking
  • 2
2 Comments
 
LVL 6

Accepted Solution

by:
HippyWarlock earned 500 total points
ID: 10850906
0
 
LVL 6

Expert Comment

by:HippyWarlock
ID: 10850923
0

Featured Post

The Eight Noble Truths of Backup and Recovery

How can IT departments tackle the challenges of a Big Data world? This white paper provides a roadmap to success and helps companies ensure that all their data is safe and secure, no matter if it resides on-premise with physical or virtual machines or in the cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Service mode jumper is installed... 12 270
Cell phones and iphones:  Transferring Contacts from Iphone 4S to Samsung  GT - E1200 15 67
tv problems 3 39
NCR Printer 7156 1 26
This is about my first experience with programming Arduino.
In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question