GPRS, same configuration, different results, getting LCP instead IPCP

I have a problem when connecting to the Internet using Palm m515 and Siemens S55 using IR and GPRS. I tried lots of different configuration, but it worked only after I had connected with my PC using IR first and S55. This is the log when it worked fine (after PC connection). The second log file is the most often, same configuration without PC connection first  I am receiving LCP instead IPCP. Any ideas?
FIRST LOG
S: AT+CGDCONT=1,''IP'',''gprs0.vipnet.hr''
S: ^M
S: AT+CGQMIN=1,1,1,1,1,1
S: ^M
S: ATD*99***1#
S: ^M
LCP->CfgReq
LCP<-CfgReq
LCP->CfgRej
LCP<-CfgNak
LCP->CfgReq
LCP<-CfgReq
LCP->CfgAck
LCP<-CfgAck
LCP Up
PAP->CfgReq
PAP<-Ack
PAP Up
IPCP->CfgReq
IPCP<-CfgReq
IPCP->CfgAck
IPCP->CfgReq
IPCP<-CfgRej
IPCP->CfgReq
IPCP<-CfgNak
IPCP->CfgReq
IPCP<-CfgAck
IPCP Up

SECOND LOG
S: AT+CGDCONT=1,''IP'',''gprs0.vipnet.hr''
S: ^M
S: AT+CGQMIN=1,1,1,1,1,1
S: ^M
S: ATD*99***1#
S: ^M
LCP->CfgReq
LCP<-CfgReq
LCP->CfgRej
LCP<-CfgNak
LCP->CfgReq
LCP<-CfgReq
LCP->CfgAck
LCP<-CfgAck
LCP Up
PAP->CfgReq
PAP<-Ack
PAP Up
IPCP->CfgReq
LCP<-TrmReq
LCP->TrmAck
LCP<-TrmReq
LCP->TrmAck
LCP Timeout

dantunovAsked:
Who is Participating?
 
drelectroConnect With a Mentor Commented:
Ok make sure it is set correctly on the Palm.

Try setting CGQMIN to 1,0,0,0,0,0

Try setting cgdcont like so:-

+CGDCONT=1, "IP", ''gprs0.vipnet.hr'',,0,0
0
 
drelectroCommented:
Looks like a bad username/password.
0
 
dantunovAuthor Commented:
Username and password are same for all users (38591).
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.