moman61
asked on
DHCP/Dlink 614 router
I am going to use the DHCP function of win2k server to give out my ip
addresses on my lan. I wanted to know could this also work for my
wireless pc/laptop as well? Also if this works, how would I get the pc's to
log onto the internet once windows dhcp starts giving addresses??
addresses on my lan. I wanted to know could this also work for my
wireless pc/laptop as well? Also if this works, how would I get the pc's to
log onto the internet once windows dhcp starts giving addresses??
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
moman61
Yup, this would work for all DHCP clients
You will need something to do the NATting - ie the translation of your internal network IP addresses to the external IP address of your router. According to the site (http://www.dlink.com/products/?model=DI-614%2b) your router does NAT and firewalling, which is also a very good idea. If you use the NAT function of your router, you will not need ICS as they will be doing the same thing.
Cheers
JamesDS
Yup, this would work for all DHCP clients
You will need something to do the NATting - ie the translation of your internal network IP addresses to the external IP address of your router. According to the site (http://www.dlink.com/products/?model=DI-614%2b) your router does NAT and firewalling, which is also a very good idea. If you use the NAT function of your router, you will not need ICS as they will be doing the same thing.
Cheers
JamesDS
ASKER
The advice was right on!! after a couple of extra tweaks, My entire network was able to see the internet and the addresses were sent out so I could connect my printer and my wireless users as well thank you once again!!!!!
ASKER